# Wall plug reporting back ON or OFF to Homey

**URL:** <https://community.homey.app/t/wall-plug-reporting-back-on-or-off-to-homey/96020>\
**Category:** Questions & Help\
**Tags:** homey-pro\
**Created:** [November 27, 2023, 6:51pm UTC](https://community.homey.app/t/wall-plug-reporting-back-on-or-off-to-homey/96020 "2023-11-27T18:51:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stefan.Jonsson100](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stefan.jonsson100/32/80048_2.png) [@Stefan.Jonsson100](https://community.homey.app/u/Stefan.Jonsson100)\
**Post date:** [November 27, 2023, 6:51pm UTC](https://community.homey.app/t/wall-plug-reporting-back-on-or-off-to-homey/96020/1 "2023-11-27T18:51:26Z")

</div>

I have a motion sensor (NEXA 433 MHz) that is connected to a Wall plug (Nexa 433 MHz).  
The wall plug is connected to a normal LED light.

When the motion sensor is triggered and the light turns on, I also want the wall plugg to be set to ON in the Homey App. (if it is actually turned on, not just a “fake” solution that sets the unit in the homey app to ON, if that would be possible,…)

As it is now it does not sync.  
Do I need a different wall plug? Different protocol? Or what am I missing?

Sensor: [Rörelsevakt, System Nexa LMDT-810 | NEXA](https://nexa.se/smarta-hem/systemnexa/lmdt810)  
Wall plug: [System Nexa plug-in, MYCR-2300 | NEXA](https://nexa.se/smarta-hem/systemnexa/mycr-2300)  
Sorry for the Swedish pages 🙂

---

<div class="post-metadata">

**Author:** ![Henrik\_Johnsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henrik_johnsson/32/13707_2.png) [@Henrik\_Johnsson](https://community.homey.app/u/Henrik_Johnsson)\
**Post date:** [November 27, 2023, 7:27pm UTC](https://community.homey.app/t/wall-plug-reporting-back-on-or-off-to-homey/96020/2 "2023-11-27T19:27:08Z")

</div>

The 433 MHz stuff is generally one-way, so no status. A Trådfri plug from IKEA is about as cheap as you can get, albeit a fair bit clumsier than the Nexa. Any supported ZigBee, Z-Wave or WiFi plug should do though.  
You would have to set it up so that the motion sensor triggers flows on Homey to switch the plug on and off.

---

<div class="post-metadata">

**Author:** ![Rmb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rmb/32/79135_2.png) [@Rmb](https://community.homey.app/u/Rmb)\
**Post date:** [November 27, 2023, 10:36pm UTC](https://community.homey.app/t/wall-plug-reporting-back-on-or-off-to-homey/96020/3 "2023-11-27T22:36:06Z")

</div>

Probably you have “learned” the wall socket the code off the sensor. You have to remove this sensor code from the wall socket, pair both to homey and make a flow like “when motion detected then switch on lamp”. The the status of the lamp/wall socket is shown in Homey. Also when you switch the lamp on by clicking on the tile.