# vThermo + smart implant + ds18b20 **URL:** \ **Category:** Questions & Help\ **Created:** [December 22, 2022, 8:53am UTC](https://community.homey.app/t/vthermo-smart-implant-ds18b20/73980 "2022-12-22T08:53:59Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![JohnGlattetre](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johnglattetre/32/47789_2.png) [@JohnGlattetre](https://community.homey.app/u/JohnGlattetre)\ **Post date:** [December 22, 2022, 8:53am UTC](https://community.homey.app/t/vthermo-smart-implant-ds18b20/73980/1 "2022-12-22T08:53:59Z")
Jeg kjører vThermo med en Aquara temp sensor. Dette går fint. Har satt i gang en Fibaro Smart Implant med ds18b20. Den virker, men vThermo får ikke kontakt med den. Kan noen hjelpe meg her? I have a vThermo with an Aqura temp sensor. Works fine! Have started a Fibaro Smart Implant with ds18b20. vThermo does not “see” it. Whattodo? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 22, 2022, 10:14am UTC](https://community.homey.app/t/vthermo-smart-implant-ds18b20/73980/2 "2022-12-22T10:14:53Z")
The problem is that the Aqara temp sensor and the Fibaro Smart Implant use different capabilities for temperature. **Aqara temp sensor** ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/a/0/a00abdeb59c062902dbcf1db40fdce7cf6570911.png) _Note: Because I don’t have an Aqara temp sensor in use, I took the screenshot from a motion sensor. However, I am pretty sure that the Aqara Temp sensor uses the same capabilitie. You can check this under [Developer Tools → Devices](https://tools.developer.homey.app/tools/devices). Check this out please and share what capability the Aqara temp sensor is using._ **Fibaro Smart Implant** ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/6/064e8fc1da4f9c2745a4c50e783ce0b4aba8170b.png) I guess that the vThermo app only supports the default capability **measure\_temperature**. That’s the reason why the SI is not recognized by the app. > [@JohnGlattetre](#): > > Whattodo? 2 things come to mind spontaneously: 1. Create virtual devices, each for one SI temp sensor (don’t know how many DS18B20 do you use), with the standard temperature capability **measure\_temperature**. Then you have to create flows: If the temp changed at the SI, set the temperature to the VD. I hope, that the VDs are recognized by the vThermo app. 2. Ask the vThermo app developer if it is possible to include the capabilities from the SI in the app.