# Vision outdoor siren

**URL:** <https://community.homey.app/t/vision-outdoor-siren/11186>\
**Category:** Questions & Help\
**Created:** [March 30, 2019, 3:34am UTC](https://community.homey.app/t/vision-outdoor-siren/11186 "2019-03-30T03:34:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\
**Post date:** [March 30, 2019, 3:34am UTC](https://community.homey.app/t/vision-outdoor-siren/11186/1 "2019-03-30T03:34:59Z")

</div>

Hey guys, I’m a total newbie to homey and have never been involved with anything to do with it. Something I want to change and learn. I have a vision Zm1621 outdoor siren. When linked to Homey it sets up as a generic z wave device. I have set up a perimeter with aeotec door sensors and put them under partial armed in the Heimdall configuration. When the sensor goes off with the flow I created everything is recognised but the siren or strobe does not go off. Any help would be greatly appreciated.  
Thanks from down under.

---

<div class="post-metadata">

**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\
**Post date:** [March 30, 2019, 4:05am UTC](https://community.homey.app/t/vision-outdoor-siren/11186/3 "2019-03-30T04:05:51Z")

</div>

Hey mate I have just checked on the app and unfortunately it is not supported. It’s a different outdoor siren. Obviously no way for the siren to activate without the supported version? Wish I was told by the company when purchasing.

---

<div class="post-metadata">

**Author:** ![DaneedeKruyff](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daneedekruyff/32/964_2.png) [@DaneedeKruyff](https://community.homey.app/u/DaneedeKruyff)\
**Post date:** [March 30, 2019, 8:32am UTC](https://community.homey.app/t/vision-outdoor-siren/11186/5 "2019-03-30T08:32:11Z")

</div>

Maybe it’s enough to add the Product ID and Product Type ID for the particular device to the app, think its best to ask this in the [Vision security app](https://community.homey.app/t/vision-security-app/9090) topic, if you post there the topic starter (which is the developer of the app) will be informed.

---

<div class="post-metadata">

**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\
**Post date:** [March 30, 2019, 9:52am UTC](https://community.homey.app/t/vision-outdoor-siren/11186/6 "2019-03-30T09:52:35Z")

</div>

It was recommended to go with the hub and what I wanted to do.

Honestly I was looking at the Vera plus controller and decided to go with the Homey. I’m loving it.

---

<div class="post-metadata">

**Author:** ![Colin\_Foster](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/colin_foster/32/12929_2.png) [@Colin\_Foster](https://community.homey.app/u/Colin_Foster)\
**Post date:** [March 30, 2019, 9:53am UTC](https://community.homey.app/t/vision-outdoor-siren/11186/7 "2019-03-30T09:53:35Z")

</div>

Thanks I’ll do that. Sorry new to the forum and wasn’t sure where to post. Thanks for the information.