# Using Fibaro smart implant for waterlevel measurement? **URL:** \ **Category:** Devices\ **Tags:** z-wave\ **Created:** [September 12, 2021, 4:47pm UTC](https://community.homey.app/t/using-fibaro-smart-implant-for-waterlevel-measurement/51552 "2021-09-12T16:47:45Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Rob\_Veenis](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rob_veenis/32/30144_2.png) [@Rob\_Veenis](https://community.homey.app/u/Rob_Veenis)\ **Post date:** [September 12, 2021, 4:47pm UTC](https://community.homey.app/t/using-fibaro-smart-implant-for-waterlevel-measurement/51552/1 "2021-09-12T16:47:46Z")
Hello All, My situation is like this: I have a house (in France) with a basement / garage which is half underground. In front of the door of the garage (slope down) there is a kind of reservoir to collect water when it rains. If the reservoir overflows all the water will still enter the basement / garage and that happened allready twice. I installed a pump in the reservoir to pump the water away, it is connected to a neo coolcam switch. What I want to achieve is that the pump will start at a high waterlevel in the reservoir and stop when the waterlevel is low. For that I was thinking to use a Fibaro smart implant. Put 2 wires connected to input 1 in the reservoir to make contact when the water is at a high level, and 2 at input 2 for a low level. Does anybody have an idea if this will work? Love to hear from you all! ---
**Author:** ![Carlo\_Veraart1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/carlo_veraart1/32/120889_2.png) [@Carlo\_Veraart1](https://community.homey.app/u/Carlo_Veraart1)\ **Post date:** [March 27, 2025, 7:24pm UTC](https://community.homey.app/t/using-fibaro-smart-implant-for-waterlevel-measurement/51552/2 "2025-03-27T19:24:48Z")
I have a water valve of Braukmann/Resideo/Honeywell… but i cannot connect it (yet) on the Homey…