# Usb kabel schakelen **URL:** \ **Category:** 🇳🇱 Nederlands (Dutch)\ **Created:** [January 1, 2025, 3:13pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115 "2025-01-01T15:13:04Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Willem\_de\_Nie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_de_nie/32/115230_2.png) [@Willem\_de\_Nie](https://community.homey.app/u/Willem_de_Nie)\ **Post date:** [January 1, 2025, 3:13pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/1 "2025-01-01T15:13:04Z")
Aan mijn tv zit een usb kabel die ik gebruik om een gehoorapparaat kastje te voeden. Die wil ik aan en uit kunnen zetten vanuit homey. Zoek dus een smartschakelaar/contactdoos voor usb. ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [January 1, 2025, 3:20pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/2 "2025-01-01T15:20:04Z")
daar zijn er niet veel van, zover ik weet. Wat is de reden om die te schakelen?, Alhoewel als ik eerst googled had… > **[Sonoff Micro Zigbee USB (5V DC) smart adaptor / relay switch](https://www.hashop.nl/Sonoff-Micro-Zigbee-USB-(5V-DC)-smart-adaptor-/-relay-switch)** > > Sonoff Micro ZB is een Zigbee 5V USB smart controller waarmee u eenvoudig het aanzetten/opladen van USB-apparaten via een 5V USB-lader kunt regelen. Ik zie alleen nog geen support in de App, maar wellicht is het zo simpel als Generic Zigbee Device en On/Off … ---
**Author:** ![Willem\_de\_Nie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_de_nie/32/115230_2.png) [@Willem\_de\_Nie](https://community.homey.app/u/Willem_de_Nie)\ **Post date:** [January 1, 2025, 3:23pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/3 "2025-01-01T15:23:54Z")
Als ik door het huis loop (gaat de verbinding met mijn hoorapparaat aan en uit ) of als de magnetron aan gaat dan reageert dat apparaat terwijl ik dat op dat moment niet wil. Alleen als ik echt tv zit te kijken wil ik die aan kunnen zetten. ---
**Author:** ![Willem\_de\_Nie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_de_nie/32/115230_2.png) [@Willem\_de\_Nie](https://community.homey.app/u/Willem_de_Nie)\ **Post date:** [January 1, 2025, 3:25pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/4 "2025-01-01T15:25:15Z")
Ik had wel gegoogled maar op de verkeerde termen. ---
**Author:** ![JohanP](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/johanp/32/119002_2.png) [@JohanP](https://community.homey.app/u/JohanP)\ **Post date:** [January 1, 2025, 4:33pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/5 "2025-01-01T16:33:51Z")
Wellicht omslachtig, maar een kleine powered usb hub ertussen en die op een tussenstekker ? Als het alleen om power en niet om data gaat, gewoon een usb-lader in een tussenstekker. Anders wordt het solderen aan de 5v van een usb stekker en een fibaro of shelly implant daar op… ---
**Author:** ![Willem\_de\_Nie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_de_nie/32/115230_2.png) [@Willem\_de\_Nie](https://community.homey.app/u/Willem_de_Nie)\ **Post date:** [January 1, 2025, 4:38pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/6 "2025-01-01T16:38:26Z")
Dank voor het meedenken inmiddels de Innosmart Smart USB Adapter - Zigbee - Smart plug usb besteld! ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [January 1, 2025, 6:01pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/7 "2025-01-01T18:01:36Z")
Waarom de Innosmart als ik vragen mag? Hoewel hij hetzelfde lijkt als de Sonoff is er voor Innosmart geen Homey App. Voor Sonoff wel, hoewel deze dit device niet ondersteund lijkt het. Mogelijk heb je dan met de Sonoff wellicht meer kans op ondersteuning in de toekomst dan met een merk waar nog helemaal geen app voor is. Voor aan/uit heb je mogelijk geen app nodig (als voor dit device hetzelfde geldt als tussenstekkers en lampen), maar voor iets geavanceerdere functies wel… ---
**Author:** ![Willem\_de\_Nie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem_de_nie/32/115230_2.png) [@Willem\_de\_Nie](https://community.homey.app/u/Willem_de_Nie)\ **Post date:** [January 1, 2025, 6:28pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/8 "2025-01-01T18:28:04Z")
Goeie vraag; heb me laten leiden door intuïtie i.p.v. de feiten (die ik nog niet kende als beginner). Ik ga het gewoon proberen. ---
**Author:** ![Tools](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tools/32/3721_2.png) [@Tools](https://community.homey.app/u/Tools)\ **Post date:** [January 27, 2025, 1:42pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/9 "2025-01-27T13:42:12Z")
Ik heb deze besteld en hij schakelt als generiek zigbee device. Enigste nadeel is dat alleen eerste poort het doet omdat ik niet poort 2 en 3 kan configureren. Dus meer dan 1 poort bestellen is wat nutteloos [https://nl.aliexpress.com/item/1005007628765310.html](https://nl.aliexpress.com/item/1005007628765310.html) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [January 27, 2025, 8:16pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/10 "2025-01-27T20:16:20Z")
Je kunt evt. app support aanvragen, voor de multi poort modellen: [[APP][Pro] Tuya Zigbee App](https://community.homey.app/t/26439) ---
**Author:** ![Tools](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tools/32/3721_2.png) [@Tools](https://community.homey.app/u/Tools)\ **Post date:** [January 28, 2025, 7:08am UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/11 "2025-01-28T07:08:24Z")
Good idea, there was already an issue for the 2 plug version so I added interview data to that. > > > \### Prerequisites: > > \- Before requesting a device addition, please ensure there i…s not already a request for the device among the open issues. > \- Make sure your Homey is upgraded to firmware v5 or higher. > \- You need a physical example of the device. > > \### Device Information > > \- Device Name: \`ZigBee 3.0 USB Switch Module, 2-gang\` > \- Device Model: \`TS0002\` > \- Device Description: \`USB power on/off control\` > \- Link to device image: https://ae-pic-a1.aliexpress-media.com/kf/S59242b5ff1cf4994992e3dd412a4b7e6Y.jpg\_220x220q75.jpg\_.avif > > \### Device Interview > > \`\`\`json > { > > "ids": { > "modelId": "TS0002", > "manufacturerName": "\_TZ3000\_h1ipgkwn" > }, > "endpoints": { > "ieeeAddress": "a4:c1:38:4a:0a:99:09:f8", > "networkAddress": 34505, > "modelId": "TS0002", > "manufacturerName": "\_TZ3000\_h1ipgkwn", > "endpointDescriptors": \[ > { > "status": "SUCCESS", > "nwkAddrOfInterest": 34505, > "\_reserved": 30, > "endpointId": 1, > "applicationProfileId": 260, > "applicationDeviceId": 256, > "applicationDeviceVersion": 0, > "\_reserved1": 1, > "inputClusters": \[ > 3, > 4, > 5, > 6, > 1794, > 2820, > 57344, > 57345, > 0 > \], > "outputClusters": \[ > 25, > 10 > \] > }, > { > "status": "SUCCESS", > "nwkAddrOfInterest": 34505, > "\_reserved": 14, > "endpointId": 2, > "applicationProfileId": 260, > "applicationDeviceId": 256, > "applicationDeviceVersion": 0, > "\_reserved1": 1, > "inputClusters": \[ > 4, > 5, > 6 > \], > "outputClusters": \[\] > }, > { > "status": "SUCCESS", > "nwkAddrOfInterest": 34505, > "\_reserved": 10, > "endpointId": 242, > "applicationProfileId": 41440, > "applicationDeviceId": 97, > "applicationDeviceVersion": 0, > "\_reserved1": 0, > "inputClusters": \[\], > "outputClusters": \[ > 33 > \] > } > \], > "deviceType": "router", > "receiveWhenIdle": true, > "capabilities": { > "alternatePANCoordinator": false, > "deviceType": true, > "powerSourceMains": true, > "receiveWhenIdle": true, > "security": false, > "allocateAddress": true > }, > "extendedEndpointDescriptors": { > "1": { > "clusters": { > "identify": { > "attributes": \[\] > }, > "groups": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "nameSupport", > "value": { > "type": "Buffer", > "data": \[ > 0 > \] > }, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "scenes": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 3, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 4, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "onOff": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "onOff", > "value": false, > "reportingConfiguration": { > "direction": "reported", > "attributeDataType": 16, > "minInterval": 60, > "maxInterval": 600, > "status": "SUCCESS" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 16385, > "name": "onTime", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 16386, > "name": "offWaitTime", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 32769, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 32770, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 20480, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "metering": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "currentSummationDelivered", > "value": 0, > "reportingConfiguration": { > "direction": "reported", > "attributeDataType": 37, > "minInterval": 60, > "maxInterval": 600, > "minChange": 1, > "status": "SUCCESS" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 512, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 768, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 771, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 774, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 1, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "electricalMeasurement": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1285, > "name": "rmsVoltage", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1288, > "name": "rmsCurrent", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1291, > "name": "activePower", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 1, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "basic": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "zclVersion", > "value": 3 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1, > "name": "appVersion", > "value": 74 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 2, > "name": "stackVersion", > "value": 0 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 3, > "name": "hwVersion", > "value": 1 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 4, > "name": "manufacturerName", > "value": "\_TZ3000\_h1ipgkwn" > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 5, > "name": "modelId", > "value": "TS0002" > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 6, > "name": "dateCode", > "value": "" > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 7, > "name": "powerSource", > "value": "mains" > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 65502 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65534, > "name": "attributeReportingStatus", > "value": "PENDING" > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65506 > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65507 > } > \] > } > }, > "bindings": { > "ota": {}, > "time": { > "attributes": \[ > { > "acl": \[ > "readable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 1 > } > \] > } > } > }, > "2": { > "clusters": { > "groups": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "nameSupport", > "value": { > "type": "Buffer", > "data": \[ > 0 > \] > }, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "scenes": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 1, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 3, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 4, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > }, > "onOff": { > "attributes": \[ > { > "acl": \[ > "readable", > "reportable" > \], > "id": 0, > "name": "onOff", > "value": true, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "reportable" > \], > "id": 65533, > "name": "clusterRevision", > "value": 2, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 16385, > "name": "onTime", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > }, > { > "acl": \[ > "readable", > "writable", > "reportable" > \], > "id": 16386, > "name": "offWaitTime", > "value": 0, > "reportingConfiguration": { > "status": "NOT\_FOUND", > "direction": "reported" > } > } > \] > } > }, > "bindings": {} > }, > "242": { > "clusters": {}, > "bindings": {} > } > } > } > } > \`\`\` > > \### Additional Comments: > > \> \*\*Note:\*\* Provide any other relevant information or requests related to the device. Link to where you bought the device can be of help > > Bought the device from here (the "Zigbee 2 USB" version): https://www.aliexpress.com/item/1005007378724802.html > > \### How to interview a device > > \- Add the device as a generic Zigbee device in Homey > \- Navigate to https://developer.athom.com/tools/zigbee. > \- Interview the device, the button for this is to the right of the device in the list of Zigbee units. > \- Click the copy button/icon to capture the device information. > \- Paste the copied information above. > > \> \*\*Note:\*\* To be able to add more devices to the Tuya Zigbee app, we rely on community members like you to provide interviews of the devices you want to be added. Thank you for your contribution! ---
**Author:** ![LeonardoZ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/leonardoz/32/121412_2.png) [@LeonardoZ](https://community.homey.app/u/LeonardoZ)\ **Post date:** [June 1, 2025, 12:30pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/12 "2025-06-01T12:30:11Z")
Ik heb om het toevoegen van dit device verzocht en sinds gisteravond is het device toegevoegd aan de testversie van de onofficiële Sonoff app. ---
**Author:** ![Barryr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/barryr/32/12591_2.png) [@Barryr](https://community.homey.app/u/Barryr)\ **Post date:** [February 13, 2026, 7:55pm UTC](https://community.homey.app/t/usb-kabel-schakelen/126115/13 "2026-02-13T19:55:40Z")
Misschien een te simpele gedachte maar mijn tv schakelt usb poorten uit (instellingen) bij uitschakelen. Als dat bij jouw tv ook kan heb je niets extra’s nodig.