# Unknown node used in z-wave network

**URL:** <https://community.homey.app/t/unknown-node-used-in-z-wave-network/13264>\
**Category:** Questions & Help\
**Created:** [May 17, 2019, 6:32pm UTC](https://community.homey.app/t/unknown-node-used-in-z-wave-network/13264 "2019-05-17T18:32:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![t3o](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/t3o/32/10227_2.png) [@t3o](https://community.homey.app/u/t3o)\
**Post date:** [May 17, 2019, 6:32pm UTC](https://community.homey.app/t/unknown-node-used-in-z-wave-network/13264/1 "2019-05-17T18:32:43Z")

</div>

Hi,

I’ve added a danalock v3 and it works fine as long as I’m in the range of the homey, but when I move it to the next building it starts using a node as repeater which does not belong to my network. The highest id I have is 24 but it uses something with id 64 which is not in my list:

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/e/e1b9ffc7da12414b663af27b926fd6c3bbf822a0.png)

Tried to remove the lock and add it again but after a while it starts using the node 64 again. How could I discover what might be the repeater with id 64 if it is not listed?

---

<div class="post-metadata">

**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\
**Post date:** [May 17, 2019, 10:41pm UTC](https://community.homey.app/t/unknown-node-used-in-z-wave-network/13264/2 "2019-05-17T22:41:19Z")

</div>

As it states “unknown” for route, then that route shown is not the route being taken, and the id is probably just a placeholder of some sorts