# Trigger on devices that has not reported in specific zone **URL:** \ **Category:** Flows\ **Created:** [August 10, 2019, 9:22am UTC](https://community.homey.app/t/trigger-on-devices-that-has-not-reported-in-specific-zone/16664 "2019-08-10T09:22:51Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![StefanS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stefans/32/8499_2.png) [@StefanS](https://community.homey.app/u/StefanS)\ **Post date:** [August 10, 2019, 9:22am UTC](https://community.homey.app/t/trigger-on-devices-that-has-not-reported-in-specific-zone/16664/1 "2019-08-10T09:22:51Z")
Hi. Searched for this, but cant find any good tips, so I’ll ask. I want to create a flow that triggers when a device has not reported for a while. There are a trigger for “Device hasnt reported in…”. And that works. But it triggers on more things than I want. My goal is to see that temp sensors in for example fridge/freezer report as they should. But making a general flow with “Device has not reported” will also give me reports on for example . I also have some old (not so important) sensors (433) that does nreport so often, and those I dont care about. So I was looking for an “And…” that said for example “If device is in zone xxx”. But for what I can figure out, it is all or notinng. Maybe I can of course set a variable or countdown any time a specific sensor change temp, and trigger on that, but the I will have to do a couple of flows for every sensor I’d like to keep track on, so it would be much easier to just arrow down the report trigger to a specific zone for example. Any tips on how to solve this? /Stefan ---
**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\ **Post date:** [August 10, 2019, 9:44am UTC](https://community.homey.app/t/trigger-on-devices-that-has-not-reported-in-specific-zone/16664/3 "2019-08-10T09:44:58Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/5/5a9cd486ad1b3785efd3cc5770c24bc34bb29a9c.jpeg) ---
**Author:** ![StefanS](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stefans/32/8499_2.png) [@StefanS](https://community.homey.app/u/StefanS)\ **Post date:** [August 10, 2019, 9:52am UTC](https://community.homey.app/t/trigger-on-devices-that-has-not-reported-in-specific-zone/16664/4 "2019-08-10T09:52:51Z")
Ahh. Great! Of course. Did not look for the tags in “Logic/is exact”, but there was the zone. Perfect, Thanks!! ---
**Author:** ![Atle\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/atle_d/32/72521_2.png) [@Atle\_D](https://community.homey.app/u/Atle_D)\ **Post date:** [March 18, 2023, 10:44am UTC](https://community.homey.app/t/trigger-on-devices-that-has-not-reported-in-specific-zone/16664/5 "2023-03-18T10:44:45Z")
hello, I did exactly this before reading this thread. But when I turn off the power to a unit in the zone, it is not sending me a push-message. What could be the reason? The device is a jacusi connected to a Aeotec power meter. My idea was that when Homey lost connection to the Aeotec, it would tell me after 5 minutes. How can I troubleshoot this, or is there an alternative solution to this? I also tried “Changed power, current”, but that is not working, because once the power is cut, there is no change…