# Transfer Telldus Thermo/Hygrometer from Telldus live to Homey 2026

**URL:** <https://community.homey.app/t/transfer-telldus-thermo-hygrometer-from-telldus-live-to-homey-2026/151544>\
**Category:** Questions & Help\
**Tags:** homey-pro\
**Created:** [February 22, 2026, 7:51pm UTC](https://community.homey.app/t/transfer-telldus-thermo-hygrometer-from-telldus-live-to-homey-2026/151544 "2026-02-22T19:51:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stein\_Hagen](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stein_hagen/32/121141_2.png) [@Stein\_Hagen](https://community.homey.app/u/Stein_Hagen)\
**Post date:** [February 22, 2026, 7:51pm UTC](https://community.homey.app/t/transfer-telldus-thermo-hygrometer-from-telldus-live-to-homey-2026/151544/1 "2026-02-22T19:51:28Z")

</div>

Have set up Telldus local connection and Telldus Live, but cannot connect to my thermometers type FT007TH.

I have acquired Homey pro 2026 to replace Telldus Live. I have a large number of FT007TH thermo-hygrometers that I would like to use.  
Now I have tried with Alecto, Wireless Weather Sensor, Telldus Live, Telldus Local, and 433MHz. No one can find the thermometers.

Has anyone solved this problem?

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [February 23, 2026, 3:36am UTC](https://community.homey.app/t/transfer-telldus-thermo-hygrometer-from-telldus-live-to-homey-2026/151544/2 "2026-02-23T03:36:03Z")

</div>

Maybe this works:

> [@Connect to Telldus Weather Station 14759. Possible?](https://community.homey.app/t/connect-to-telldus-weather-station-14759-possible/89913/2):
>
> Install app “Wireless weather sensors”  
> Select app in Homey, then “Configure”  
> Select Protocol “Oregon scientific v3”  
> Press “Save settings”
> 
> ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/e/3edbb3ff0323eee775ed9534957b27dbfeddf5c3.png)
> 
> After seconds all sensors will pop up under “Available sensors”  
> Close the window and add each sensor by selecting ‘+’ add device…

Else, maybe this works:

> Hello, I just received a Telldus FT007TH temperature sensor (thermometer/humidity). I used the Wireless Weather Station app in Homey, accessed the app via my mobile phone and activated the Alecto v3 protocol (Go to “More” → “Apps” → “Wireless Weather Station” → the cogwheel (top right) → “App settings” (at the top), then under protocol I checked Alecto v3, scrolled down a bit and saved “Save settings”.

Translated from:

> [@433 Mhz fungerar inte?](https://community.homey.app/t/433-mhz-fungerar-inte/89857/21):
>
> Hej, jag har precis fått in 1 temperatur sensor Telldus FT007TH (termometer/ luftfuktighet). Jag använde Wireless Weather Station appen i Homey, fick gå in i appen via mobilen och aktivera protokollet Alecto v3 (Gå till “Mer” → “Appar” → “Wireless Weather Station” → kugghjulet (uppe till höger) → “Appinställningar” (högst upp) sedan under protocol bockade jag i Alecto v3scrollade ner lite och sparade “Save settings”.

_Note: if possible, check with an other 433MHz device, like one from the [Trust Smart Home](https://homey.app/en-nl/app/nl.klikaanklikuit/Trust-Smart-Home/) series, to see if the 433MHz radio actually is functional.  
It wasn’t functioning with my 1st new Pro 2026._

Otherwise you’ll have to request for support for the ‘FT007TH’ sensor @ Athom, they created the Telldus 433MHz app (the only Telldus 433MHz app out there)  
On the app store page you"ll find the link

 ![Screenshot_20260223_043427_Ecosia](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/b/cbd6b4be3aa1eb859c1b7414c06fb2e6e8a74868.jpeg)