# Tibber Pulse no flow cards?

**URL:** <https://community.homey.app/t/tibber-pulse-no-flow-cards/127831>\
**Category:** Apps\
**Created:** [January 15, 2025, 2:11pm UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831 "2025-01-15T14:11:31Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![n8flight](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/n8flight/32/79236_2.png) [@n8flight](https://community.homey.app/u/n8flight)\
**Post date:** [January 15, 2025, 2:11pm UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831/1 "2025-01-15T14:11:31Z")

</div>

Hello, i use the tibber app [Tibber App für Homey | Homey](https://homey.app/de-de/app/com.tibber/Tibber/)

I have a Tibber pulse and set up the device. Unfortunately i can´t use any information of the pulse in my flows. I can´t select the pulse device in my flows.

What´s wrong? What do i have to change?

Thank you.

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [January 15, 2025, 9:28pm UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831/2 "2025-01-15T21:28:50Z")

</div>

Did you add a Tibber device after installing the app?  
Most apps don’t function without you adding a related device first.

> ![1000041499](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/0/107fe4928a3f870719a1f7af2b45907922656e71.jpeg)

---

<div class="post-metadata">

**Author:** ![DirkH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkh/32/78952_2.png) [@DirkH](https://community.homey.app/u/DirkH)\
**Post date:** [January 16, 2025, 11:22am UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831/3 "2025-01-16T11:22:22Z")

</div>

Hi @n8flight ,  
If you have installed the device “pulse” you can use the properties of the pulse in Logic cards or similar cards by choosing the attributes of your pulse device.

 ![pulse properties](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/7/87035ca93cb3c0e154385ed65834014ba8756109.png)  
If that is not sufficient, what are you looking for?

---

<div class="post-metadata">

**Author:** ![n8flight](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/n8flight/32/79236_2.png) [@n8flight](https://community.homey.app/u/n8flight)\
**Post date:** [January 17, 2025, 8:06am UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831/4 "2025-01-17T08:06:45Z")

</div>

Thank you. I have installed Pulse as a device and its up and working. But i couldn´t use any of these properties. I couldn´t select the device pulse in flows its not there. I swear.

But today its there. Seems so that it takes a while to install fully. Never had that before.

Thank you!!

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [January 17, 2025, 10:41am UTC](https://community.homey.app/t/tibber-pulse-no-flow-cards/127831/5 "2025-01-17T10:41:01Z")

</div>

YW!  
Usually when you add a device, it’s flowcards should be available right away.  
When you used the web app, it’s a possibility something went wrong and a cached page (with “old” info) was presented.