# Thermostat ts601

**URL:** <https://community.homey.app/t/thermostat-ts601/72269>\
**Category:** Devices\
**Tags:** zigbee\
**Created:** [November 16, 2022, 8:48pm UTC](https://community.homey.app/t/thermostat-ts601/72269 "2022-11-16T20:48:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pavel\_Souky](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pavel_souky/32/57437_2.png) [@Pavel\_Souky](https://community.homey.app/u/Pavel_Souky)\
**Post date:** [November 16, 2022, 8:48pm UTC](https://community.homey.app/t/thermostat-ts601/72269/1 "2022-11-16T20:48:07Z")

</div>

Hi,  
I have a thermostat TS601. Is an Radiator valve with thermostat.  
This thermostat works perfectly with Tuya app, but i think it is not easy to map it to homey.  
I found this topic:

> **[TuYa TS0601\_thermostat control via MQTT | Zigbee2MQTT](https://www.zigbee2mqtt.io/devices/TS0601_thermostat.html)**
>
> Integrate your TuYa TS0601\_thermostat via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway.

There are some command to get the information i need.  
Is it possible to write/get some script just for changing the actual preset?

I am able to set all the program without tuya or homey. I have on my mind this flow:  
When the last person leave the home  
Then set preset to ECO

When first person enter to house  
Then set preset to schedule.

Thanks!

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [November 17, 2022, 2:30am UTC](https://community.homey.app/t/thermostat-ts601/72269/2 "2022-11-17T02:30:29Z")

</div>

1st, it’s possible to use the [Tuya Cloud app](https://community.homey.app/t/app-pro-tuya-cloud/21313). But then your zigbee valve controller communicates (partly) via internet, which is a bit odd. It should work fine though.

2nd, the [test version of the Tuya Zigbee app](https://homey.app/a/com.tuya.zigbee/test/) supports these:

Valve Controller

```
_TYZB01_ymcdbl3u / TS0111
_TZ3000_o4cjetlm / TS0001
_TYZB01_4tlksk8a / TS0001 (Test version only)
_TZ3000_tvuarksa / TS0001 (Test version only)
_TZ3000_j9568h44 / TS0001 (Test version only)
_TZ3000_iedbgyxt / TS0001 (Test version only)

```

You can try if it works, otherwise you can [request for support here](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439)

---

<div class="post-metadata">

**Author:** ![bengro](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/bengro/32/65919_2.png) [@bengro](https://community.homey.app/u/bengro)\
**Post date:** [August 11, 2023, 9:37pm UTC](https://community.homey.app/t/thermostat-ts601/72269/3 "2023-08-11T21:37:36Z")

</div>

Did you get anywhere with this? I’ve spent some hours trying to make this thermostat work with Homey but the device doesn’t seem to expose the right clusters.