# Telldus Z-net Lite V2/ Migrationg to Homey Bridge/Pro

**URL:** <https://community.homey.app/t/telldus-z-net-lite-v2-migrationg-to-homey-bridge-pro/73181>\
**Category:** Devices\
**Tags:** z-wave, homey-bridge\
**Created:** [December 6, 2022, 1:12pm UTC](https://community.homey.app/t/telldus-z-net-lite-v2-migrationg-to-homey-bridge-pro/73181 "2022-12-06T13:12:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Urban\_Jonsson](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/urban_jonsson/32/66063_2.png) [@Urban\_Jonsson](https://community.homey.app/u/Urban_Jonsson)\
**Post date:** [December 6, 2022, 1:12pm UTC](https://community.homey.app/t/telldus-z-net-lite-v2-migrationg-to-homey-bridge-pro/73181/1 "2022-12-06T13:12:40Z")

</div>

Have 2 Telldus Z-Net lite V2 on 2 different locations with door sensors (Z-wave) and 433 mhz, connected to Telldus live so I can see the devices on both sites!  
My Question is, if I by a Homey bridge and put it on location 1 to try it out, is it simple to move that later to Location 2 for thoose devices there and buy a pro version for site 1  
What kind of difficultes can ther be?  
Regards Urban Jonsson

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [December 6, 2022, 7:53pm UTC](https://community.homey.app/t/telldus-z-net-lite-v2-migrationg-to-homey-bridge-pro/73181/2 "2022-12-06T19:53:28Z")

</div>

I’m not sure what you mean. But you can only pair a zwave device to one controller at a time.  
When you move or switch the controllers, you’ll have to pair the devices again.

For Homey Pro there’s a neat script you can use to swap the “old” device with the “new” device, so you don’t have to fix all related flows:

> [@\[HOW-TO\]\[Pro\]\[Cloud\] - Tool to FIX (advanced) flows after removing and re-adding devices](https://community.homey.app/t/how-to-pro-cloud-tool-to-fix-advanced-flows-after-removing-and-re-adding-devices/65018):
>
> rotating_lightwarning Use at own risk! warning rotating_light Hi, So I just go a new house and wanted to make my Zigbee network a bit better by removing an re-adding my devices so I get a stable network. But the issue with this is you have to fix all your flows. (Ofcourse [Flow Checker App for Homey | Homey](https://homey.app/a/com.athom.flowchecker/) can indicate the broken flows) I made a small script which can help with fixing the flows. So what do you need: Device ID you would like to update - You can get this via t…

Didn’t fail on me once.