# Sonoff zigbee temperature sensors **URL:** https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209 **Category:** Questions & Help **Created:** [February 16, 2026, 4:45pm UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209 "2026-02-16T16:45:35Z") **Posts on this page:** 7 **Page:** 1
### Author: ![Peter85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter85/32/121456_2.png) [@Peter85](https://community.homey.app/u/Peter85) #### Post date: [February 16, 2026, 4:45pm UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/1 "2026-02-16T16:45:35Z")
Hi, I seem to be having an issue with flow’s evaluating the temperature of sonoff sensors. Im trying to figure out if its the sensors or Homey, but when I use the card “When temperature below x” the card reports false when the actual sensor is below x ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/b/f/bf987483b0d749a6468123cfd352b7ae84788dba.png) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/2/022efe3627c5beaef5ce9cc0cc811fcd31c1a142.png) Any ideas? Thanks ---
### Author: ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG) #### Post date: [February 16, 2026, 5:24pm UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/2 "2026-02-16T17:24:07Z")
I recreated your flow and found the same problem. **Temperature is higher than 10 °C** is identified as incorrect,… ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/7/e7395a10f3752a03ac7c21927c9316fb001b72df.png) …but the current temperature is almost 19 °C: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/7/2749eb6616ed7f11001efad9ecc1d7d6680b37fe.png) Because I believe these are app-specific flow cards, I’m guessing that the “official” Sonoff app is buggy. Therefore, this bug should be reported to the app developer on GitHub. A link to GitHub can be found in the App Store. * * * By the way, in the meantime or as a workaround, you can use the built-in logic flow cards. The result is displayed correctly there: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/6/061f4da9a3e3155ef062b3edddf9eef089ef440f.png) (Translation: Temperature is higher than 10 °C) That’s the usual method I use. It’s the first time I’ve seen the flow card that you used. ---
### Author: ![Peter85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter85/32/121456_2.png) [@Peter85](https://community.homey.app/u/Peter85) #### Post date: [February 16, 2026, 9:07pm UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/3 "2026-02-16T21:07:44Z")
Thanks for confirming it’s not just me! Yes I already knew about the logic way, but thought I’d just use the cards because it’s immediately apparent which sensor it is with my naming structure. ---
### Author: ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG) #### Post date: [February 17, 2026, 11:20am UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/4 "2026-02-17T11:20:23Z")
I created an issue on GitHub: > > > Hi, > > There is a bug in the following “global” flow cards in the "And..." section…: > \- (Device) Humidity is higher than (x) % > \- (Device) Temperature is higher than (x) °C > > The result that comes out is the opposite of what it should be. > Here is an example. It should be checked whether the temperature is greater than 10 °C and the result is "false": > > \Image > > But the current temperature is almost 19 °C: > \Image > > So the result should be "true" (blue connection point) and not "false" (orange connection point). > > This bug was discovered by another user in the forum, and I was able to reproduce it. Even with the humidity. > https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209 > > Thank you in advance for fixing the bug. > > Best regards, > Dirk ---
### Author: ![Peter85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter85/32/121456_2.png) [@Peter85](https://community.homey.app/u/Peter85) #### Post date: [February 17, 2026, 11:41am UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/5 "2026-02-17T11:41:49Z")
Appreciated, I hadn’t got around to doing it yet 😁 ---
### Author: ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG) #### Post date: [February 24, 2026, 11:28am UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/6 "2026-02-24T11:28:44Z")
@Peter85, the bug was fixed with the new app version 1.8.2 ([link](https://homey.app/a/se.styrahem.sonoff.zigbee/)): ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/0/d/0dde8f9a383afa88f75d3fdd1036d59d4cc1f9a0.jpeg) After testing it, I can confirm that. ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/3/83febb3f7862ec0a455f25fc3ea154cf3b42353e.png) (Temperature is higher than 25 °C Humidity is higher than 85 %) Both queries return “False” as result, which is correct given at the current temperature of 19.3 °C and current humidity of 53.8 %: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/8/78f7a46cec8d7cefcba9aa577db2de2b3530d2db.png) ---
### Author: ![Peter85](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter85/32/121456_2.png) [@Peter85](https://community.homey.app/u/Peter85) #### Post date: [February 26, 2026, 9:27pm UTC](https://community.homey.app/t/sonoff-zigbee-temperature-sensors/151209/7 "2026-02-26T21:27:37Z")
Excellent news, thanks for updating the thread.