# SONOFF Smart Roller Shutter Switch MINI-RBS **URL:** \ **Category:** Devices\ **Created:** [August 8, 2025, 1:25pm UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291 "2025-08-08T13:25:36Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![prahn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/prahn/32/123233_2.png) [@prahn](https://community.homey.app/u/prahn)\ **Post date:** [August 8, 2025, 1:25pm UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291/1 "2025-08-08T13:25:36Z")
Did anyone already tested the new Roller Shutter Switch from Sonoff? I am using a Sonoff switch for light for some months without a problem, but thiis new Roller Shutter is not on the list of supported devices currently… Regards, prahn > **[SONOFF Smart Roller Shutter Switch | MINI-RBS](https://sonoff.tech/en-us/products/sonoff-smart-roller-shutter-switch-mini-rbs)** > > SONOFF MINI-RBS is a compact smart roller shutter switch with percentage control, scheduling, and error calibration. Supports 1A motors and Matter platforms like Alexa, Apple Home, and Google Home. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [August 8, 2025, 2:54pm UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291/2 "2025-08-08T14:54:17Z")
Because this Roller Shutter uses Matter as radio protocol, this device doesn’t need to be supported by either of the two available Homey Sonoff apps, which both just support Zigbee devices. If you own a Homey Pro (early 2023) or a Homey Pro mini, this Roller Shutter should work via Matter. [Matter for Homey Pro (Early 2023) and Homey Pro mini](https://support.homey.app/hc/en-us/articles/9075551662108-Matter-for-Homey-Pro-Early-2023-and-Homey-Pro-mini) ---
**Author:** ![prahn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/prahn/32/123233_2.png) [@prahn](https://community.homey.app/u/prahn)\ **Post date:** [August 13, 2025, 8:28am UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291/3 "2025-08-13T08:28:25Z")
Ok, great, thank you for feedback. I will try it and share the feedback here. ---
**Author:** ![prahn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/prahn/32/123233_2.png) [@prahn](https://community.homey.app/u/prahn)\ **Post date:** [August 19, 2025, 6:24pm UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291/4 "2025-08-19T18:24:25Z")
I received the “SONOFF Smart Roller Shutter Switch MINI-RBS” these days… and installed it today on one of my roller shutters. Integrating into my Homey Pro 2023 worked without any problem, but after connecting the cables and trying to move the Roller Shutter, I only got it to work to open or close the rollers completely. I was not able to open it to 10% or to 50%, it more worked like an On and Off switch. On = Closed and Off = Open. I also had a look in the Advanced Settings, but there was not anything useful to configure?! Does anyone know if I can configure this Matter device to work as it should? Find a screenshot of the Advanced Settings below: ![IMG_8557](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/6/66f3a35a3a8d75aae74f2c62d94267fea200e8b2.png) ---
**Author:** ![prahn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/prahn/32/123233_2.png) [@prahn](https://community.homey.app/u/prahn)\ **Post date:** [August 19, 2025, 6:50pm UTC](https://community.homey.app/t/sonoff-smart-roller-shutter-switch-mini-rbs/141291/5 "2025-08-19T18:50:28Z")
Ok, Problem solved! 😅 Just read the manual. I had to start the calibration. Great. Now everything works as expected.👍