# Sonoff App 1.13.1 - MINI-ZBRBS reports inverted cover position (0% = open, 100% = closed)

**URL:** <https://community.homey.app/t/sonoff-app-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157470>\
**Category:** Questions & Help\
**Created:** [July 22, 2026, 2:36pm UTC](https://community.homey.app/t/sonoff-app-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157470 "2026-07-22T14:36:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Terizzle](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/terizzle/32/56366_2.png) [@Terizzle](https://community.homey.app/u/Terizzle)\
**Post date:** [July 22, 2026, 2:36pm UTC](https://community.homey.app/t/sonoff-app-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157470/1 "2026-07-22T14:36:14Z")

</div>

Hi,

I believe there is an issue with the MINI-ZBRBS driver.

The shutter itself works correctly and calibration completes successfully. However, the reported position appears to be inverted.

**Current behavior:**

- When the shutter is fully **open** , Homey reports **0%**.
- When the shutter is fully **closed** , Homey reports **100%**.

Using the Homey Developer Tools:

- Setting `windowcoverings_set = 0` fully **opens** the shutter.
- Setting `windowcoverings_set = 1` fully **closes** the shutter.

Because of this, integrations such as HomeKit (via HomeKitty) report the wrong state. Apple Home shows the cover as **Closed** when it is physically **Open** , and **Open** when it is physically **Closed**.

The issue persists after removing the device, pairing it again, and recalibrating it.

**Expected behavior:**

- 0% = fully closed
- 100% = fully open

Could you please verify whether the position mapping for the MINI-ZBRBS driver is inverted?

Thank you.

---

<div class="post-metadata">

**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\
**Post date:** [July 22, 2026, 3:14pm UTC](https://community.homey.app/t/sonoff-app-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157470/2 "2026-07-22T15:14:32Z")

</div>

Please prevent double postings. Instead link to your original post or ask a moderator to move it to the appropriate topic.

Check my response to your same question here: [Sonoff 1.13.1 - MINI-ZBRBS reports inverted cover position (0% = open, 100% = closed) - #2 by SunBeech](https://community.homey.app/t/sonoff-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157469/2)

---

<div class="post-metadata">

**Author:** ![SunBeech](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/sunbeech/32/111391_2.png) [@SunBeech](https://community.homey.app/u/SunBeech)\
**Post date:** [July 22, 2026, 3:10pm UTC](https://community.homey.app/t/sonoff-app-1-13-1-mini-zbrbs-reports-inverted-cover-position-0-open-100-closed/157470/3 "2026-07-22T15:10:04Z")

</div>

Please note that this is a user/community forum.

I assume you are using the official SONOFF app for Homey (by StyraHem Sweden)? You can reach out to the developer via the contact details on [the app’s app store page](https://homey.app/en-nl/app/se.styrahem.sonoff.zigbee/Sonoff/).
