# Smoke detector **URL:** \ **Category:** Devices\ **Tags:** zigbee\ **Created:** [March 23, 2022, 12:55pm UTC](https://community.homey.app/t/smoke-detector/61987 "2022-03-23T12:55:00Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Michiel\_Nijmegen](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@Michiel\_Nijmegen](https://community.homey.app/u/Michiel_Nijmegen)\ **Post date:** [March 23, 2022, 12:55pm UTC](https://community.homey.app/t/smoke-detector/61987/1 "2022-03-23T12:55:00Z")
Hello all, I’m looking for a smoke detector device to connect with my Homey. What smoke detector do you use? Do you advice that device? I’m very curious to your opinions 😃 Michiel ---
**Author:** ![Undertaker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/undertaker/32/53278_2.png) [@Undertaker](https://community.homey.app/u/Undertaker)\ **Post date:** [March 23, 2022, 2:22pm UTC](https://community.homey.app/t/smoke-detector/61987/2 "2022-03-23T14:22:30Z")
I use the Z-Wave smoke detector from Heiman. It is a very simple and inexpensive device, as it has no additional functions other than reporting smoke. That’s why the batteries last a long time. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 23, 2022, 3:29pm UTC](https://community.homey.app/t/smoke-detector/61987/3 "2022-03-23T15:29:16Z")
I use Somfy smoke detectors. I have 3 of them around the house and they interlink so if one goes off then the others follow. I can also send a test command from Homey to check them and make them sound. They do require a Somfy hub, which I already had, so might be a bit expensive if you don’t have one for other devices. ---
**Author:** ![Horst\_Penker](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/horst_penker/32/48815_2.png) [@Horst\_Penker](https://community.homey.app/u/Horst_Penker)\ **Post date:** [March 23, 2022, 4:08pm UTC](https://community.homey.app/t/smoke-detector/61987/4 "2022-03-23T16:08:37Z")
Hi, I use the FIBARO Smoke Sensor / Z-Wave Plus Rauchsensor with integrated temperature sensor. Easy installation, no problems so far, battery seems long lasting, small and inconspicuous. Amazon \* ASIN: B00HRE0MCI ([https://m.media-amazon.com/images/I/312qyUrimRL](https://m.media-amazon.com/images/I/312qyUrimRL)._AC\_SY580_.jpg) ]([https://www.amazon.de/gp/aw/d/B00HRE0MCI?psc=1&ref=ppx\_pop\_mob\_ap\_asin\_image#](https://www.amazon.de/gp/aw/d/B00HRE0MCI?psc=1&ref=ppx_pop_mob_ap_asin_image#)) ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [March 24, 2022, 11:13am UTC](https://community.homey.app/t/smoke-detector/61987/5 "2022-03-24T11:13:23Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/8/f813fdcca39740dd00d2e5b7e621755cc4f24576.png) I guess there are not that much supported ZigBee smoke detector available. I know that the Heiman smoke detector is also available as ZigBee version, but I don’t know exactly which app supports this version. Just search in the forum. ---
**Author:** ![Frank\_van\_de\_Schuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_van_de_schuur/32/35882_2.png) [@Frank\_van\_de\_Schuur](https://community.homey.app/u/Frank_van_de_Schuur)\ **Post date:** [March 24, 2022, 2:18pm UTC](https://community.homey.app/t/smoke-detector/61987/6 "2022-03-24T14:18:23Z")
The Heiman zigbee smoke detectors are supported by the Trust Smart Home app ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [March 24, 2022, 7:54pm UTC](https://community.homey.app/t/smoke-detector/61987/7 "2022-03-24T19:54:18Z")
Newer versions not yet. Athom wrote to me they will update the Trust app to support this version too HS1SA ![Screenshot_20220324-205319_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/b/dbaa6957d505af1701cffa97112bed055a62537d.jpeg) ---
**Author:** ![Frank\_Hooft](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_hooft/32/11643_2.png) [@Frank\_Hooft](https://community.homey.app/u/Frank_Hooft)\ **Post date:** [March 27, 2022, 12:21pm UTC](https://community.homey.app/t/smoke-detector/61987/8 "2022-03-27T12:21:02Z")
Netatmo. this works with the latest app. ---
**Author:** ![Paul\_Rade](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/paul_rade/32/16419_2.png) [@Paul\_Rade](https://community.homey.app/u/Paul_Rade)\ **Post date:** [March 27, 2022, 5:11pm UTC](https://community.homey.app/t/smoke-detector/61987/9 "2022-03-27T17:11:20Z")
I have 2 Fibaro Smoke detectors. ---
**Author:** ![Willem59](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/willem59/32/16860_2.png) [@Willem59](https://community.homey.app/u/Willem59)\ **Post date:** [March 28, 2022, 12:07pm UTC](https://community.homey.app/t/smoke-detector/61987/10 "2022-03-28T12:07:31Z")
I use smoke and heatdetectors from Fireangel. They have a slot for z-wave plus module. You can connect them wired also. This works fine. They have an zigbee-module too, but a few months ago that did not work yet. ---
**Author:** ![janklamer](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/janklamer/32/24666_2.png) [@janklamer](https://community.homey.app/u/janklamer)\ **Post date:** [March 28, 2022, 8:17pm UTC](https://community.homey.app/t/smoke-detector/61987/11 "2022-03-28T20:17:54Z")
I also use the Heimann z-wave smoke detectors plus the Heimann carbonmonoxide detectors. ---
**Author:** ![RuudBinnendijk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ruudbinnendijk/32/47671_2.png) [@RuudBinnendijk](https://community.homey.app/u/RuudBinnendijk)\ **Post date:** [March 30, 2022, 7:42am UTC](https://community.homey.app/t/smoke-detector/61987/12 "2022-03-30T07:42:22Z")
I use KlikAanKlikUit zigbee battery (3 years) smoke detectors (homey bridge) About 30 euri. Small and a nice design. Flow connected with Sonos. Groet van Ruud ---
**Author:** ![Nelson1976](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nelson1976/32/18341_2.png) [@Nelson1976](https://community.homey.app/u/Nelson1976)\ **Post date:** [March 30, 2022, 11:43am UTC](https://community.homey.app/t/smoke-detector/61987/13 "2022-03-30T11:43:17Z")
I use Tuya smokedetectors they work great also zigbee versions or WiFi what you want. Search with AliExpress not expensive and I tested them with smoke detector test can. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [March 30, 2022, 1:08pm UTC](https://community.homey.app/t/smoke-detector/61987/14 "2022-03-30T13:08:42Z")
@Michiel_Nijmegen, now it’s you turn. Make a decision… 😂 ---
**Author:** ![Michiel\_Nijmegen](https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/32.png) [@Michiel\_Nijmegen](https://community.homey.app/u/Michiel_Nijmegen)\ **Post date:** [April 1, 2022, 7:24am UTC](https://community.homey.app/t/smoke-detector/61987/15 "2022-04-01T07:24:49Z")
I choose these ones [KlikAanKlikUit - Draadloze Rookmelder - ZSDR-850 | bol.com](https://www.bol.com/nl/nl/p/klikaanklikuit-draadloze-rookmelder-zsdr-850/9200000090862688/?s2a=) So the KlikAanKlikUit - Draadloze Rookmelder - ZSDR-850. It is a zigbee smoke detector. Works fantastic! I also use the HomeyKit app so I can use Homekit from apple. As you see on the image below it works very well and accurate. ![Image zigbee](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/b/dbe10a7e3f0cfbc7806e075ddf571be6b2515e71.jpeg) ---
**Author:** ![Daniel\_Pointer-Tax](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_pointer-tax/32/25357_2.png) [@Daniel\_Pointer-Tax](https://community.homey.app/u/Daniel_Pointer-Tax)\ **Post date:** [May 29, 2022, 1:13pm UTC](https://community.homey.app/t/smoke-detector/61987/16 "2022-05-29T13:13:49Z")
Looks good! How did you add the device to Homey? I don’t see a ZSDR-850 in the list of supported devices in the KlikAanKlikUit app in Homey? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/b/6bf005ec132259f759cd123bc92a6b13d6f9205c.jpeg) ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [May 29, 2022, 1:19pm UTC](https://community.homey.app/t/smoke-detector/61987/17 "2022-05-29T13:19:39Z")
> [@Daniel\_Pointer-Tax](#): > > ZSDR-850 Guess thats a Trust device? Kaku supports only RF 433Mhz > **[Trust Smart Home (Zigbee)](https://homey.app/en-us/app/nl.klikaanklikuit.zigbee/Trust-Smart-Home-(Zigbee)/)** > > Maximize your home comfort ---
**Author:** ![Daniel\_Pointer-Tax](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/daniel_pointer-tax/32/25357_2.png) [@Daniel\_Pointer-Tax](https://community.homey.app/u/Daniel_Pointer-Tax)\ **Post date:** [May 29, 2022, 1:37pm UTC](https://community.homey.app/t/smoke-detector/61987/18 "2022-05-29T13:37:57Z")
Great, thanks! ---
**Author:** ![Henk\_Renting](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/henk_renting/32/87634_2.png) [@Henk\_Renting](https://community.homey.app/u/Henk_Renting)\ **Post date:** [May 29, 2022, 5:57pm UTC](https://community.homey.app/t/smoke-detector/61987/19 "2022-05-29T17:57:26Z")
I use the Kaku ones too. You can indeed use the Trust app on your Homey to add the Kaku smoke (and CO) detectors, just like @Dijker mentioned. Works great! ---
**Author:** ![FKey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fkey/32/14793_2.png) [@FKey](https://community.homey.app/u/FKey)\ **Post date:** [August 2, 2022, 6:37pm UTC](https://community.homey.app/t/smoke-detector/61987/20 "2022-08-02T18:37:19Z")
Cant find it in the documentation Do all smoke sensor units sound when one is triggered? (Or can you make a flow that makes them all sound the alarm) - For the kaku - Or the heimdall [Next page](https://community.homey.app/t/smoke-detector/61987.md?page=2)