# Smart wall controller with display?

**URL:** <https://community.homey.app/t/smart-wall-controller-with-display/25014>\
**Category:** Devices\
**Created:** [January 26, 2020, 9:44am UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014 "2020-01-26T09:44:40Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![rzarajczyk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rzarajczyk/32/8447_2.png) [@rzarajczyk](https://community.homey.app/u/rzarajczyk)\
**Post date:** [January 26, 2020, 9:44am UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014/1 "2020-01-26T09:44:40Z")

</div>

I would like to have some kind of wall panel, with some buttons and a display. I would like to be able to fully configure buttons and data to be shown on the display, ideally using Homey flow.

Example Homey flow I dream about: when I press button A on the controller, increase temperature on Eurotronic Spirit and display current target temperature on wall controller. After a minute display current temperature from Aquara temperature sensor.

Second example: when I press B button on controller, set light color to cold white and show “cold white” on wall display.

Third example: display current value of external thermometer sensor (or whatever else sensor) untill I press some button.

Is there a device I could use?

Ideally it should talk with Homey via z-wave or ZigBee, WiFi is also fine. RF no because of range issues.

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [January 26, 2020, 2:21pm UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014/2 "2020-01-26T14:21:28Z")

</div>

Search this forum for “dashboard”

---

<div class="post-metadata">

**Author:** ![rindler](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rindler/32/5501_2.png) [@rindler](https://community.homey.app/u/rindler)\
**Post date:** [January 26, 2020, 3:25pm UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014/3 "2020-01-26T15:25:05Z")

</div>

If you’re not looking for a plug and play device, you can build your own with arduino, [Homeyduino display](https://community.homey.app/t/homeyduino-display/24843).

---

<div class="post-metadata">

**Author:** ![rhannink](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rhannink/32/10648_2.png) [@rhannink](https://community.homey.app/u/rhannink)\
**Post date:** [January 28, 2020, 8:53am UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014/4 "2020-01-28T08:53:47Z")

</div>

Hello,

I created a alarm panel based on a M5Stack, which connects through MQTT. Via MQTT it is fully customizable.  
You can also program the M5Stack with homeyduino i guess.

see: [https://github.com/rhannink/M5Stack-HA-Alarm-panel](https://github.com/rhannink/M5Stack-HA-Alarm-panel)

Gr. Remco

---

<div class="post-metadata">

**Author:** ![rzarajczyk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rzarajczyk/32/8447_2.png) [@rzarajczyk](https://community.homey.app/u/rzarajczyk)\
**Post date:** [February 1, 2020, 5:16pm UTC](https://community.homey.app/t/smart-wall-controller-with-display/25014/5 "2020-02-01T17:16:36Z")

</div>

M5Stack seems to be nice, I’ve never done low-level programming but well… looks like a good challange for me 🙂