# Smart presence triggers too quick **URL:** \ **Category:** Apps\ **Created:** [September 16, 2020, 8:26pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741 "2020-09-16T20:26:29Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![JonE](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@JonE](https://community.homey.app/u/JonE)\ **Post date:** [September 16, 2020, 8:26pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/1 "2020-09-16T20:26:29Z")
Hi all! I have a smart presence flow which goes like this: [https://homey.app/f/2SSAoi](https://homey.app/f/2SSAoi) So it trigger’s when someone’s phone looses its IP address in the house LAN network. But because I have different access points in my house (for a specific reason), the flow also triggers if the phone switches from access point, which of course isn’t needed. Usually switching access point takes less than a few seconds. I hoped to solve it by setting a delay or something like that in the flow. Something like: IF xxx’s left the house AND xxx stays out of the house for 1 minute, THEN send out notification. But I can’t see a way how to set this AND condition. Anyone got an idea? Or has an alternative solution? ---
**Author:** ![Frank\_van\_de\_Schuur](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/frank_van_de_schuur/32/35882_2.png) [@Frank\_van\_de\_Schuur](https://community.homey.app/u/Frank_van_de_Schuur)\ **Post date:** [September 16, 2020, 8:32pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/2 "2020-09-16T20:32:34Z")
The use of the countdown app could help. If the connection is lost then set a timer for 60 secs. If the countdown timer is at zero and there is still no connection then the person has left. ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [September 16, 2020, 8:34pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/3 "2020-09-16T20:34:12Z")
There should be a delay of 900 seconds, that’s default. Its in the advanced settings of the device. You could increase it to a higher number. ---
**Author:** ![JonE](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@JonE](https://community.homey.app/u/JonE)\ **Post date:** [September 16, 2020, 8:48pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/4 "2020-09-16T20:48:20Z")
Where exactly can I change this? I don’t see it when going to More \> Apps \> Smart Presence. Ah got it. Under the device! (person) ---
**Author:** ![JonE](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@JonE](https://community.homey.app/u/JonE)\ **Post date:** [September 16, 2020, 8:51pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/5 "2020-09-16T20:51:45Z")
But 900 seconds… That’s 15 minutes… Auto changing access points only takes a few seconds at maximum. So not sure if increasing this number will help solving the problem? ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [September 16, 2020, 10:04pm UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/7 "2020-09-16T22:04:38Z")
Yes and that’s the weird thing. It should only set you away after that time, makes me wonder is it is something else what makes you go away. ---
**Author:** ![JonE](https://avatars.discourse-cdn.com/v4/letter/j/f9ae1b/32.png) [@JonE](https://community.homey.app/u/JonE)\ **Post date:** [September 17, 2020, 4:37am UTC](https://community.homey.app/t/smart-presence-triggers-too-quick/34741/8 "2020-09-17T04:37:07Z")
Yes it sets me back home after reconnecting. Usually both (detecting I’m away and detecting I’m back) takes 1 minute at maximum.