# Smart Implant of garage door and automatic gates **URL:** \ **Category:** Devices\ **Tags:** z-wave\ **Created:** [May 14, 2020, 7:58pm UTC](https://community.homey.app/t/smart-implant-of-garage-door-and-automatic-gates/29879 "2020-05-14T19:58:16Z")\ **Posts on this page:** 1\ **Showing post:** 36
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [November 6, 2020, 12:19pm UTC](https://community.homey.app/t/smart-implant-of-garage-door-and-automatic-gates/29879/36 "2020-11-06T12:19:21Z")
Just “one” more question @Peter_Bittner. By separating the input from the output, further options for the Smart Implant are possible. I have therefore thought about which connection variants are possible (I did’t include the second output): ![Anschluss_SI_2020-11-06 Seite 1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/9/c940b1065c9fddd8c1db8778f214b3f6e4a8dcf1.png) ![Anschluss_SI_2020-11-06 Seite 2](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/3/73d85773be1218adfd35088e3b0782fb3156ff98.png) If something should be wrong, please let me know (I’m not an electrician). Background of the current situation and what I want to realize: My garage has no separate entrance/exit. Therefore I already use a monostable button from the producer of the garage door opener to close the garage from the inside when leaving (then I don’t need to dig the remote control out of my pocket). But I don’t want to connect it to the input IN1 or IN2 like it is shown in the manual (picture “Standard”). I will leave the push button connected where it is. Parallel to the original button I will connect the output (OUT1) of the Smart Implant. Then I can activate the OUT1 with flows (e.g. Siri). This gives me 2 free inputs on the Smart Implant. I will use one for the reed contact to check if the garage is closed. At the other input I would like to install another button to activate a scene event (press button twice, picture “Option 4”). According to the manual AS is possible, but I can’t find an action card when creating the flows. I have already ordered a button to try this out, but maybe you have an idea? ![Bildschirmfoto von Safari (06-11-20, 12-50-40)](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/6/16811cef2d45824f65b089a7c885e0f445317246.png) ![FCEDE026-45E4-4E0B-A627-FE28B856A3D4](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/3/13e0b9b4399632e7f662780d8b20ad9bdef48a55.jpeg) ![4EF6536F-4F42-4FCE-8672-57571A926D41](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/f/4/f4ac9bb7d0d20f13e311b67efd5e8faa0131b372.jpeg) --- _[View the full topic](https://community.homey.app/t/smart-implant-of-garage-door-and-automatic-gates/29879)._