# Seperate the input from output - Fibaro Smart Implant

**URL:** <https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950>\
**Category:** Devices\
**Created:** [April 25, 2020, 5:32pm UTC](https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950 "2020-04-25T17:32:59Z")\
**Posts on this page:** 1\
**Showing post:** 31

<div class="post-metadata">

**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\
**Post date:** [August 12, 2020, 11:15am UTC](https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950/31 "2020-08-12T11:15:42Z")

</div>

## Important update (12 september 2021):

As of Homey v7, the device will now be (by default) included secure (S2 Access) if you use the correct code during pairing, then these commands will **not** work, the smart implant needs to be **un-secure** for this to work.  
You can still include the device un-secure by using a **wrong code** during pairing, for example “00000”

@Evgeny_Grin @Peter_Bittner @MrBlue  
Actually fibaro made it pretty smart, being able to separate both in and output independently.

Full overview:  
**Connected in/output 1** : (default)  
`Node-ID, 0x75, 0x01, 0x00, 0x00`  
**Seperated in/output 1** :  
`Node-ID, 0x75, 0x01, 0x02, 0x00`

**Connected in/output 2** : (default)  
`Node-ID, 0x60, 0x0D, 0x00, 0x06, 0x75, 0x01, 0x00, 0x00`  
**Seperated in/output 2** :  
`Node-ID, 0x60, 0x0D, 0x00, 0x06, 0x75, 0x01, 0x02, 0x00`

Also doable in flows with the “Z-Wave → Send raw command” flow card, just leave away the “Node-ID”

---

_[View the full topic](https://community.homey.app/t/seperate-the-input-from-output-fibaro-smart-implant/28950)._