# Roborock app **URL:** \ **Category:** Apps\ **Created:** [April 14, 2021, 1:47pm UTC](https://community.homey.app/t/roborock-app/46240 "2021-04-14T13:47:06Z")\ **Posts on this page:** 1\ **Showing post:** 41
**Author:** ![Justin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/justin/32/23485_2.png) [@Justin](https://community.homey.app/u/Justin)\ **Post date:** [July 10, 2021, 6:40am UTC](https://community.homey.app/t/roborock-app/46240/41 "2021-07-10T06:40:06Z")
Well theres not that much to test. Since it has not have any complicated flow cards, I was able to test each function this night when I was a sleep, using logging and push messages. **Right now supporting:** - Start cleaning (action) - Stop cleaning (action) - Go to charger (action) - Say hello (action) - Set vacuum mode (action) _Last test to be sure_ - Is working (and card) - Is currently … (and card) - Status changed to … (trigger) - Battery level above … (trigger) - Battery level below … (trigger) - Battery level changed (trigger) - Status changed (trigger) These are the easiest triggers that I will publish first. In the next release: **Split up the models** In the list with addable devices I will split up the ‘Roborock robot’ device into the models such as ‘S7’. This way it’s easier to track which devices are supported and it’s easier to add or remove mopping functions from the actions. **Add zone cleanup** This function will allow you to start a zone cleanup, if possible by zone name that you may set in the Xiaomi app. This prevents searches for coordinates. **Go to point** Not much needed to explain here. This WILL work on coodinates. **Mopping mode** Setup if the mop will be used or not, at this moment only on the S7. **Mopping water intensity** Setup how many water the mop will get. **Watertank cards** See if the watertank is currently attched or not. Once my experimental app is approved I will create a new topic regarding this app. --- _[View the full topic](https://community.homey.app/t/roborock-app/46240)._