# RF (433mhz) not working?

**URL:** <https://community.homey.app/t/rf-433mhz-not-working/51022>\
**Category:** Questions & Help\
**Created:** [August 31, 2021, 6:40pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022 "2021-08-31T18:40:52Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [August 31, 2021, 6:40pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/1 "2021-08-31T18:40:53Z")

</div>

It started a few months ago. Some of my wall switches that communicate over RF suddenly stopped working. No response, and could not add them again. They were using the app KlikaanKlikUit, and I assumed the issues was with this app. However, I recently bought another device that also used RF (roller blinds), and I have the same issue connecting that one. Now I realize these are my only RF devices, so it may seem like a general RF issue. Had other people test the same roller blinds with the same version of the app, and they had no issue.

Question is then if there is something I can try, other than restarting Homey? I really don’t want to send it back to the store if I can avoid it. My house will be crippled while the homey is out…

---

<div class="post-metadata">

**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\
**Post date:** [August 31, 2021, 6:52pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/2 "2021-08-31T18:52:28Z")

</div>

PtP on Homey for a couple of minutes.  
And try removing the batterys from all battery powered RF sensors devices. Sometimes these start jamming the RF frequency if the voltage drops blocking the signals. Then investigate if neighbors use a RF babyfoon or other transmitter device.

---

<div class="post-metadata">

**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\
**Post date:** [August 31, 2021, 7:00pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/3 "2021-08-31T19:00:16Z")

</div>

What specific devices are the ones you have trouble with, and is a reboot heling temporarily or not at all? That may help with identifying known issues.

If the above post does not help:

Another thing you can try is do a full firmware install (keeping data - so you won’t loose anything, but backup first is highly reccommended all the same):

1. Put your Homey in recovery mode by placing it upside down, awaiting the countdown and hearing the welcome message, and putting it back on it’s feet.
2. Go to [setup.athom.com](http://setup.athom.com/) to reinstall
3. Reinstall through your browser, do not switch to the mobile app
4. While the Homey is searching for updates, press the ALT button. Select ‘Download full update’
5. When prompted, choose: Keep your user data

If that also fails: I do not know about your other RF devices, but some people are having problems with KAKU devices since the 7.x version of the KAKU app came out. The community store has the old version thanks to @Rocodamelshekima so you could try if that changes things for you: [Homey Community Store](https://store.homey.community/app/nl.klikaanklikuit) (make sure you log in at the community store and have the community app on your Homey if you want to install it).

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [August 31, 2021, 7:04pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/4 "2021-08-31T19:04:55Z")

</div>

Thanks for great advice! Will try this. The device I’m trying to add now is the “Huglo” roller blinds produced by Jysk (Danish). It’s supposed to work with the app called Sunway Window Coverings. Will try the reset you describe tomorrow, and then post the result here.

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [August 31, 2021, 7:18pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/5 "2021-08-31T19:18:27Z")

</div>

Though it looks like Sunway is not KaKu/CoCo…  
Huglo isn’t mentioned as supported:

 ![Screenshot_20210831-211602_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/6/860ba65db5964392de9791867de898e6d4153331.jpeg)  
`Bofu` doesn’t seem to work either, and the app developer can’t be contacted…

> [@Knut](#):
>
> Had other people test the same roller blinds with the same version of the app, and they had no issue.

Same Homey firmware version too?

_A longshot: maybe [Somfy RTS](https://homey.app/en-gb/app/com.somfy/Somfy-RTS/) works with it?_

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [August 31, 2021, 8:49pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/6 "2021-08-31T20:49:56Z")

</div>

Yes, I know the device is not one of those, but according to multiple sources, it will work fine as the “Brel Blinds” device. Haven’t tried Somfy RTS, but will do! But I do find it a bit hard to believe that the fact that I donæt get contact with any of my RF devices (across apps) is a coincidence.

---

<div class="post-metadata">

**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\
**Post date:** [August 31, 2021, 8:55pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/7 "2021-08-31T20:55:24Z")

</div>

Start troubleshooting with fe a simple KAKU remote and KAKU socket.  
If the Remote works with the socket you have at least 1 good Transmitter and one good receiver.  
Try Homey to learn the Remote and try to learn the Socket from Homey.

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [September 4, 2021, 10:32am UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/8 "2021-09-04T10:32:58Z")

</div>

So, I’ve tried some things without luck:

- Powered off and let it be off for 30 minutes

- Set in recovery mode and set up again, but I could not find how to use the browser as explained here. No matter which browser I used, it just sent me to the app with no other option. Anyone knows the trick here?

- went to the rf-section of the developer panel, and tried listening for the remote. Homey shows no signal received for either of the frequencies

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/0/202c00538d33fa9f4fe7ebc9e4d8e05938a200f2.jpeg)

Does it seem like RF module is just, and that I need to buy a new homey?

---

<div class="post-metadata">

**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\
**Post date:** [September 4, 2021, 11:29am UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/9 "2021-09-04T11:29:49Z")

</div>

> [@Knut](#):
>
> Set in recovery mode and set up again, but I could not find how to use the browser as explained here. No matter which browser I used, it just sent me to the app with no other option. Anyone knows the trick here?

Use a PC or Mac, and/or remove the app for a while? It should be a link on the bottom of the page if I remember correctly. It is the procedure I’d most expect to be helpful. Did you also contact Athom for help?

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [September 4, 2021, 6:30pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/10 "2021-09-04T18:30:04Z")

</div>

I cannot find it on a PC browser at all. May seem like they have removed this option… Also cannot find the community store app in the normal app store. Has it been blocked, perhaps? Or do you need to install it in a different way than through the normal app store?

---

<div class="post-metadata">

**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\
**Post date:** [September 4, 2021, 6:48pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/11 "2021-09-04T18:48:15Z")

</div>

Press the Alt key to continue in the browser

> [@How to rollback firmware from V 5.0 back to V 4.20](https://community.homey.app/t/how-to-rollback-firmware-from-v-5-0-back-to-v-4-20/32796/14):
>
> Hi Jamie! Yes ofcourse! I have procedure how to restore Homey but it doesnt work for me. Now i made factory reset one more time but still V5.0.xx load. What i was doing: 1.Checked in homey developer that experimental tab ticked off 2.Checked in Homey app that all experimental ticks are off and ticked of automatic update. 3. Chrome web browser open [setup.athom.com](http://setup.athom.com/) , proced until when need to connect to Homey setup SSID 4.Turned homey upp and down, count from 10-0 , connected to Homey set…

---

<div class="post-metadata">

**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\
**Post date:** [September 4, 2021, 7:06pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/12 "2021-09-04T19:06:57Z")

</div>

> [@Knut](#):
>
> I cannot find it on a PC browser at all

You are browsing to [http://setup.athom.com/](http://setup.athom.com/) right? There is no PC Homey app, that was kind of the point. 🙂

---

<div class="post-metadata">

**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\
**Post date:** [September 4, 2021, 7:12pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/13 "2021-09-04T19:12:52Z")

</div>

> [@Knut](#):
>
> cannot find the community store app in the normal app store.

That’s a tricky question!

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [September 4, 2021, 7:42pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/14 "2021-09-04T19:42:22Z")

</div>

Right, the link appeared when I held the ALT-button. Thanks for the help, will try this way of restoring then!

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [September 4, 2021, 8:40pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/15 "2021-09-04T20:40:55Z")

</div>

> [@Knut](#):
>
> community store app

It’s independent (from Athom)

> **[Homey Community Store](https://store.homey.community/hcs)**
>
> The Homey Community Store (HCS) provides an alternative App Store for your Homey.

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [September 5, 2021, 12:48pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/16 "2021-09-05T12:48:38Z")

</div>

Now I have tried the full restore (with full download), and I’ve also tried the community store KAKU app, but still no sign of contact with any of the RF devices… I suppose contacting Athom or the retailer is the last option now. Thanks for your help!

---

<div class="post-metadata">

**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\
**Post date:** [September 5, 2021, 2:05pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/17 "2021-09-05T14:05:07Z")

</div>

That’s a pity.  
One last try: With earlier updates I had to push several kaku remote buttons for a few minutes, before Homey “came to life” at 433MHz.

Did your Homey ever fall to the ground? Maybe the 433MHz antenna broke off.

---

<div class="post-metadata">

**Author:** ![Pas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/pas/32/10893_2.png) [@Pas](https://community.homey.app/u/Pas)\
**Post date:** [September 6, 2021, 6:33pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/18 "2021-09-06T18:33:25Z")

</div>

I had the same issue some months ago.  
I tried also a lot of possibillities.  
Only reset to default solved the issue.  
All devices had to be connected again after that.

---

<div class="post-metadata">

**Author:** ![Edwin\_D](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/edwin_d/32/136417_2.png) [@Edwin\_D](https://community.homey.app/u/Edwin_D)\
**Post date:** [September 6, 2021, 7:30pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/19 "2021-09-06T19:30:37Z")

</div>

Did you try restoring a backup after the full reset?

---

<div class="post-metadata">

**Author:** ![Knut](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/knut/32/10350_2.png) [@Knut](https://community.homey.app/u/Knut)\
**Post date:** [September 6, 2021, 9:09pm UTC](https://community.homey.app/t/rf-433mhz-not-working/51022/20 "2021-09-06T21:09:48Z")

</div>

I chose to “keep my data”. I would assume that is the same as restoring from a backup, given that the device is first restored? I can maybe try to set it up completely blank like Pas says, and see if that makes a difference. I suppose I can restore from a backup later

[Next page](https://community.homey.app/t/rf-433mhz-not-working/51022.md?page=2)
