# Reset fibaro brandmelder na melding **URL:** \ **Category:** Questions & Help\ **Created:** [September 6, 2019, 12:08pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798 "2019-09-06T12:08:15Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Gorillus](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gorillus/32/12452_2.png) [@Gorillus](https://community.homey.app/u/Gorillus)\ **Post date:** [September 6, 2019, 12:08pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/1 "2019-09-06T12:08:16Z")
Hallo, Vandaag kreeg ik een brandmelding van een fibaro brandmelder. Na de melder gereset te hebben bleef de melding in Homey staan en krijg ik die er niet uit. (Het wolkje bij rookmelder) Ook als de melder wakker gemaakt is blijft de melding staan. Hoe moet je Homey of de Fibaro melder nou resetten en wat is de volgorde van resetten? Ik gebruik een Homey pro early 2019 V 2.5.2. Groeten Richard ---
**Author:** ![Jamie](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jamie/32/5274_2.png) [@Jamie](https://community.homey.app/u/Jamie)\ **Post date:** [September 10, 2019, 1:52pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/2 "2019-09-10T13:52:30Z")
If you could please keep the conversation in English as much as possible, then more people will be able to participate and help you. If you would rather not or can’t communicate in English then please check out Non-English boards at [https://community.homey.app/c/non-english](https://community.homey.app/c/non-english) [Nederlands (Dutch)](https://community.homey.app/c/non-english/nederlands), [Dansk (Danish)](https://community.homey.app/c/non-english/dansk), [Deutsch (German)](https://community.homey.app/c/non-english/deutsch), [Svenska (Swedish)](https://community.homey.app/c/non-english/svenska), [Français (French)](https://community.homey.app/c/non-english/francais), [Polskie (Polish)](https://community.homey.app/c/non-english/polskie), [Fiński (Finnish)](https://community.homey.app/c/non-english/finski) ---
**Author:** ![Rickp](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rickp/32/9466_2.png) [@Rickp](https://community.homey.app/u/Rickp)\ **Post date:** [September 10, 2019, 2:10pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/3 "2019-09-10T14:10:08Z")
Could try to trigger it again with some heat/smoke (match, wierrook? ). This way it should give another smoke - no smoke signal. ---
**Author:** ![0burner0](https://avatars.discourse-cdn.com/v4/letter/0/90ced4/32.png) [@0burner0](https://community.homey.app/u/0burner0)\ **Post date:** [November 26, 2020, 4:32pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/4 "2020-11-26T16:32:50Z")
I got the same problem? Did the solution @Rickp mentiond worked? ---
**Author:** ![Wout-1976](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wout-1976/32/175413_2.png) [@Wout-1976](https://community.homey.app/u/Wout-1976)\ **Post date:** [June 3, 2022, 5:42am UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/5 "2022-06-03T05:42:31Z")
Same problem here. Anyone with a solution? ---
**Author:** ![heining](https://avatars.discourse-cdn.com/v4/letter/h/96bed5/32.png) [@heining](https://community.homey.app/u/heining)\ **Post date:** [May 1, 2023, 7:20pm UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/6 "2023-05-01T19:20:37Z")
Any follow up on this? All my Fibaro sensors report smoke and when I click for more info they tell me that 10 months ago this happened… And another smoke sensor 24 months. Homey should have an option somewhere to remove that notification? ---
**Author:** ![Giddy31](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/giddy31/32/80408_2.png) [@Giddy31](https://community.homey.app/u/Giddy31)\ **Post date:** [August 28, 2023, 6:49am UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/7 "2023-08-28T06:49:41Z")
Apparently no one (at Homey or Fibaro) felt compelled to solve this issue? I solved it today by removing the smoke detector from Homey (Homey Pro 2019) and adding it again. But I think there should be a better/smarter solution. Otherwise I would have to remove and add again and again whenever there’s a detection alarm or when I test it’s functionality. ---
**Author:** ![Remco\_Hertogs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/remco_hertogs/32/59007_2.png) [@Remco\_Hertogs](https://community.homey.app/u/Remco_Hertogs)\ **Post date:** [December 14, 2025, 11:31am UTC](https://community.homey.app/t/reset-fibaro-brandmelder-na-melding/17798/8 "2025-12-14T11:31:55Z")
Press the button on the (smoke) detector until it beeps and the white LED lights up. When the green LED lights up, press the button briefly. The smoke detector will reset itself and send a message via Homey (no smoke detected).