# Reolink Deurbel POE (ONVIF Camera)

**URL:** <https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211>\
**Category:** Vragen & hulp\
**Tags:** homey-pro\
**Created:** [August 16, 2023, 9:48am UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211 "2023-08-16T09:48:21Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![buldm01](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/buldm01/32/7885_2.png) [@buldm01](https://community.homey.app/u/buldm01)\
**Post date:** [August 16, 2023, 9:48am UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/1 "2023-08-16T09:48:22Z")

</div>

Ik heb en Reolink Deurbel POE eze heb ik via onvif app gekoppeld.  
Deze lijkt goed te werken. krijg een melding in homey pro ‘The vistor detected alarm turned’

 ![afb1](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/8/e88babf0572308d4e245038e4b774f824a25e7cb.png)  
Maar in de flow gebeurd er niets  
 ![afb2](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/8/9/89b3d9b1ff0b22116bfa7192ca0bc2d3ec07c93c.jpeg)  
wat kan er mis zijn?

---

<div class="post-metadata">

**Author:** ![Maarten\_Huijbers](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/maarten_huijbers/32/30160_2.png) [@Maarten\_Huijbers](https://community.homey.app/u/Maarten_Huijbers)\
**Post date:** [August 19, 2023, 11:08am UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/2 "2023-08-19T11:08:00Z")

</div>

Mijn ervaring is dat soms na het installeren van een app de homey even herstart moet worden om de app goed te laten werken, misschien helpt dat in jouw geval ook.

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [August 19, 2023, 11:10am UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/3 "2023-08-19T11:10:08Z")

</div>

Misschien handiger om te vragen in de app thread, de developer is behoorlijk actief daar: [[APP][Pro] Support for ONVIF compatible cameras (Release 2.0.30, Test 2.0.41)](https://community.homey.app/t/app-pro-support-for-onvif-compatible-cameras-release-2-0-30-test-2-0-41/28377)

---

<div class="post-metadata">

**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\
**Post date:** [August 19, 2023, 11:27am UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/4 "2023-08-19T11:27:38Z")

</div>

Gebruikt u de laatste versie?  
Ik heb een probleem opgelost met die stroom een ​​paar versies terug.

---

<div class="post-metadata">

**Author:** ![MarWal](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marwal/32/12410_2.png) [@MarWal](https://community.homey.app/u/MarWal)\
**Post date:** [August 23, 2023, 4:31pm UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/5 "2023-08-23T16:31:48Z")

</div>

Hoe heb je de Reolink deurbelcam poe toe kunnen voegen? Ik krijg steeds “discovery error: undefined” bij het toevoegen.

---

<div class="post-metadata">

**Author:** ![MarWal](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/marwal/32/12410_2.png) [@MarWal](https://community.homey.app/u/MarWal)\
**Post date:** [August 23, 2023, 4:34pm UTC](https://community.homey.app/t/reolink-deurbel-poe-onvif-camera/87211/6 "2023-08-23T16:34:09Z")

</div>

Al gelukt. Hoofdletter foutje.