# Relay switch with 24VDC circuit for push buttons (cabinet assembly, DIN preferrable)

**URL:** <https://community.homey.app/t/relay-switch-with-24vdc-circuit-for-push-buttons-cabinet-assembly-din-preferrable/127640>\
**Category:** Devices\
**Tags:** zigbee\
**Created:** [January 13, 2025, 8:32pm UTC](https://community.homey.app/t/relay-switch-with-24vdc-circuit-for-push-buttons-cabinet-assembly-din-preferrable/127640 "2025-01-13T20:32:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mizgal](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mizgal/32/57526_2.png) [@mizgal](https://community.homey.app/u/mizgal)\
**Post date:** [January 13, 2025, 8:32pm UTC](https://community.homey.app/t/relay-switch-with-24vdc-circuit-for-push-buttons-cabinet-assembly-din-preferrable/127640/1 "2025-01-13T20:32:38Z")

</div>

Hi,

My case is to find a device as below:

- mounted on a DIN rail in cabinet (can be also normal (wall) version, I will print holders)
- relay switches to control 230VAC outputs for lights
- as an input, I want to use push buttons with UTP connection (5e cat.) directly wired to the cabinet
- so for switches need to be low voltage (for coil) 12-24VDC, but as an output, 230VAC,
- preffered communication: Zigbee, Wi-Fi or LAN,
- due to more then 15 circuits, we can speak about single modules and as well, multi output boards.

I searched forum for a different working devices with Homey with no success. Best buy guide does not help: [[Smart DIN Rail Modules | Best Buy Guide](https://homey.app/en-nl/best-buy-guide/din-rail-modules/)]

There are some boards on Ali with ESP32 (those should work in general) but I am not sure, if really circuits for switches will be 12 or 24VDC and outputs 230VAC.

I want to avoid to install relays in a wall behind switch and put there standard wiring.

Thank you in advance for support and suggestions.