# Regulating 12 VDC fan speeds

**URL:** <https://community.homey.app/t/regulating-12-vdc-fan-speeds/160579>\
**Category:** Devices\
**Tags:** zigbee, homey-pro, advancedflow\
**Created:** [October 9, 2026, 4:16pm UTC](https://community.homey.app/t/regulating-12-vdc-fan-speeds/160579 "2026-10-09T16:16:30Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nosegear](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nosegear/32/177044_2.png) [@Nosegear](https://community.homey.app/u/Nosegear)\
**Post date:** [October 9, 2026, 4:16pm UTC](https://community.homey.app/t/regulating-12-vdc-fan-speeds/160579/1 "2026-10-09T16:16:30Z")

</div>

Just posting here in case others are also facing the same or similar issue: I was looking for a proper solution to set the speed of an array of four 12 VDC fans. Oddly, there are no Zigbee controllers available specifically for that purpose! My utility cupboard is home for one of my Marstek Venus E 3.0 batteries, a UPC, my home fuse box (3 x 25A), four NAS devices, my FTU, router and switch so it can get a tad warm in there.

So I purchased a Gledopto GL-C-009P led dimmer (non RGB, single channel) and set that up as the controller. Works like a charm, so a small advanced flow now controls the speed of these fans based on the measured temperature (as provided by a Zigbee eWeLink temp / humidity sensor). Downside is that the fans now hum quite loud because of the way the Gledopto cuts the voltage (duty cycle of 3 kHz). However, with an added LC filter it’s now virtually soundless.

Fan array used:

> **[Silkwish 120mm Housing Fan, 12 V, PC Fan with Metal Grill Protection, AC...](https://www.amazon.nl/-/en/Silkwish-Protection-220V-240V-Computer-Adjustable/dp/B0G4VRJLJS)**
>
> Silkwish 120mm Housing Fan, 12 V, PC Fan with Metal Grill Protection, AC 220V-240V, Computer Fan, Adjustable Speed Control (480 x 120 x 25 mm) : Amazon.nl: Electronics & Photo

Gledopto purchased here:

> **[123led.nl - De goedkoopste led lampen en led spots!](https://www.123led.nl/Gledopto-Zigbee-led-strip-controller-Wit-Werkt-met-Philips-Hue-Gledopto-i7788.html)**
>
> Goedkoopste LED Verlichting & LED Lampen! ⭐ De nummer 1 in LED Lampen ✅ Vóór 23.59 besteld, morgen in huis ✅ Groot assortiment & de beste prijs

LC filter from China or thereabout:

> **[Amazon.com: NOYITO DC LC Filter DC EMI Power Filter 0 to 50V 2A 4A 10A 20A...](https://www.amazon.com/NOYITO-Filter-Power-Filtering-Board/dp/B0B9KM19GR)**
>
> Product Description Introduction of NOYITO DC power filter circuit: The circuit consists of three parts, the first part is a one-stage LC filter circuit, the second part is a common mode EMI filter, and the third part is a two-stage LC filter...

And finally, the sensor:

> **[Zigbee Temperature and Humidity Sensor, ZigBee Hub Required, for Remote...](https://www.amazon.nl/-/en/Zigbee-Temperature-Monitoring-Automation-Zigbee2mqtt/dp/B0G52QVM7X)**
>
> Specifications App Name: eWeLink Wireless Protocol: Zigbee 3.0 Temperature Measurement Accuracy: ±0.6 °C Humidity Measurement Accuracy: ±6 percent Operating Voltage: 3 V Material: ABS Standby Current: ≤ 5 μA Battery Type: CR2450 Standby Time: ≥ 6...

Hope it helps anyone!
