# Refresh Settings Wallmote Quad **URL:** \ **Category:** Questions & Help\ **Created:** [July 15, 2022, 10:13am UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060 "2022-07-15T10:13:03Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Wouterr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterr/32/48508_2.png) [@Wouterr](https://community.homey.app/u/Wouterr)\ **Post date:** [July 15, 2022, 10:13am UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/1 "2022-07-15T10:13:03Z")
I’ve connected a Wallmote Quad to my Homey. It’s working fine, but I can’t seem to change the advanced settings. By default the Wallmote sounds a beep when a button is pressed. I want to turn this off so I disabled this in the advanced settings (touch sound). However, this setting isn’t processed by the Wallmote since it keeps beeping. I’ve tried: - Waiting (it has been a couple of days already) - Wake Up the Wallmote by holding the button on the back for a couple of seconds What am I doing wrong in pushing these settings? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [July 15, 2022, 12:31pm UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/2 "2022-07-15T12:31:19Z")
> [@Wouterr](#): > > Waiting (it has been a couple of days already) From my experience, this does not work with any battery-powered device. But I do not know why. > [@Wouterr](#): > > Wake Up the Wallmote by holding the button on the back for a couple of seconds Does the WMQ behave as described in the instructions? Chirp and orange LED? ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/0/c0909a9038bf341db81b82f49b27d57916336b30.png) Is the battery charged? Btw, I have no problems with waking up my WMQ. ---
**Author:** ![Wouterr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterr/32/48508_2.png) [@Wouterr](https://community.homey.app/u/Wouterr)\ **Post date:** [July 15, 2022, 12:42pm UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/3 "2022-07-15T12:42:52Z")
Thanks for your reply! - Yes it chirped and flashed orange for about 2 or 3 seconds. - Yes, battery is at 100% ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [July 15, 2022, 12:55pm UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/4 "2022-07-15T12:55:15Z")
> [@Wouterr](#): > > flashed orange for about 2 or 3 seconds. But this is not correct. The LED should flash all the time as long as the WMQ is “awake”. But I don’t know what to do. Maybe contact Aeotec. ---
**Author:** ![Wouterr](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wouterr/32/48508_2.png) [@Wouterr](https://community.homey.app/u/Wouterr)\ **Post date:** [July 15, 2022, 1:06pm UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/5 "2022-07-15T13:06:40Z")
I’ve read somehwere that it will stop flashing once it receives a “no messages anymore” message from the controller (Homey in this case). But for you this method works to load the new settings? Holding the button for 3 seconds until it flashes? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [July 15, 2022, 1:22pm UTC](https://community.homey.app/t/refresh-settings-wallmote-quad/66060/6 "2022-07-15T13:22:17Z")
It’s been a while since I changed the settings, but it worked that way including LED flashing. Here information about the firmware: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/a/3acb6c4ece79feed81b662fe075bc6c95d90de63.jpeg)