# Receiving information from X2D Device
**URL:** https://community.homey.app/t/receiving-information-from-x2d-device/153599
**Category:** Devices
**Created:** [April 10, 2026, 12:13pm UTC](https://community.homey.app/t/receiving-information-from-x2d-device/153599 "2026-04-10T12:13:10Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Herve\_Domotique](https://community.homey.app/u/Herve_Domotique)
#### Post date: [April 10, 2026, 12:13pm UTC](https://community.homey.app/t/receiving-information-from-x2d-device/153599/1 "2026-04-10T12:13:10Z")
Hello,
Before using the Homey Pro 2026, I had an Eedomus box with the RFP1000 dongle. This allowed me to retrieve all the informations transmitted by the Delta Dore modules in X2D and even from Oregon sensors or others—but let’s get back to the X2D topic. I saw in the forums that it was impossible to reconnect this dongle, but why can’t we retrieve the information from the X2D modules (I’m only talking about reading or retrieving the transmitted signal here). The Homey Pro can receive the signal in 433 MHz, right?
We’re not using a proprietary mode since I was doing this before without any action, just listening, and I would get an alert when a door or window was opened (and even when the alarm was activated or triggered).
Can you help me to restore this functionality on the Homey Pro?
---
### Author:  [@smarthomesven](https://community.homey.app/u/smarthomesven)
#### Post date: [April 10, 2026, 2:10pm UTC](https://community.homey.app/t/receiving-information-from-x2d-device/153599/2 "2026-04-10T14:10:57Z")
> [@Herve\_Domotique](#):
>
> The Homey Pro can receive the signal in 433 MHz, right?
It depends on if the device uses rolling codes. Rolling codes is an RF security feature to prevent cloning (many devices use this nowadays). The 433MHz device also needs a compatible Homey app.