# Rack version of Homey Pro **URL:** \ **Category:** Ideas & Suggestions\ **Tags:** homey-pro\ **Created:** [January 29, 2022, 7:22am UTC](https://community.homey.app/t/rack-version-of-homey-pro/59350 "2022-01-29T07:22:25Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Mat](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mat/32/50904_2.png) [@Mat](https://community.homey.app/u/Mat)\ **Post date:** [January 29, 2022, 7:22am UTC](https://community.homey.app/t/rack-version-of-homey-pro/59350/1 "2022-01-29T07:22:26Z")
Hi! It would be very interesting a standard 19" rack format version of homey pro so that we can install it in the network rack with the other devices such as switches, routers etc… alternatively a shape more similar to a switch, so you can save space. Is it planned for future? ---
**Author:** ![Dijker](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@Dijker](https://community.homey.app/u/Dijker)\ **Post date:** [January 29, 2022, 7:34am UTC](https://community.homey.app/t/rack-version-of-homey-pro/59350/2 "2022-01-29T07:34:46Z")
Athom doesn’t communicate about that kind of plans out of concurrention perspective But I guess they already have them for their own, on the blue dots. ![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/0/303caa6b4945c1cfac2b6f3312ccb5df194a35e7.png) Just install a Homey Bridge to use it 🙂 Don’t expect them to come available for a probably very small audience. ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [January 29, 2022, 10:57am UTC](https://community.homey.app/t/rack-version-of-homey-pro/59350/3 "2022-01-29T10:57:54Z")
If you are a bit handy, you can easily take out the motherboard and transfer in to an empty rack housing… But then you should better install external antenna’s too, because the reach will probably be abominable bad when installed in an equipment rack… ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [January 29, 2022, 9:46pm UTC](https://community.homey.app/t/rack-version-of-homey-pro/59350/4 "2022-01-29T21:46:54Z")
Print one! Inspiration: > [@Homey Case Mod](https://community.homey.app/t/homey-case-mod/6720/50): > > I’m very pleased with the results, only minor adjustments to the design are required, will make them as soon as possible. due to warping of my 3D printer not all corners are 90 degrees. The support structure for the PCB is a perfect fit. (need something to secure it. The structure for holding the usb/audio board works very well. speaker mount is very basic. but does the job. NFC antenna is a tight fit, but works well. Only the hole for the USB port needs some adjustment, 2mm out of place + ne… > [@Homey Case Mod](https://community.homey.app/t/homey-case-mod/6720/86): > > Finally done including 3D printed case with special thanks to @AdrianLiteAuto and @Leon_van_Efferen :