# Qubino ZMNHXD1 3-phase smart meter **URL:** \ **Category:** Questions & Help\ **Created:** [December 15, 2018, 3:34pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497 "2018-12-15T15:34:22Z")\ **Posts on this page:** 20\ **Page:** 7
**Author:** ![TheDuque](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/theduque/32/16776_2.png) [@TheDuque](https://community.homey.app/u/TheDuque)\ **Post date:** [March 8, 2021, 11:26am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/123 "2021-03-08T11:26:35Z")
I’ve also contact Qubino and asked about support for Homey. They said they are working on “We were planning to integrate both of them fully in the Homey gateway but the the measures that come in place last year because of the pandemic shift all of that and many more plans so for now I can’t give you any date for the release of the app that will include our Smart Meters, I can only tell you that we’re working on that too.” I first though of just getting them and try out the solutions/options described here in the forum. But I must say, they probably exceed my knowledge of doing things. So I’m asking myself, is there any other Smart Meter out there I can integrate into Homey? I also want messure consumption of the Kitchen with all Appliances (stove, steamer, ovem, etc). Thank you and best regards Alex ---
**Author:** ![Manuel\_Martin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/manuel_martin/32/33834_2.png) [@Manuel\_Martin](https://community.homey.app/u/Manuel_Martin)\ **Post date:** [March 12, 2021, 5:12am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/124 "2021-03-12T05:12:37Z")
I know that the 1 phase smartmeter from qubino is officially integrated into Homey, but with some bugs. Another solution for you could be adding micro modules with consumption mesure, after each appliance. ---
**Author:** ![TheDuque](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/theduque/32/16776_2.png) [@TheDuque](https://community.homey.app/u/TheDuque)\ **Post date:** [March 12, 2021, 6:15am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/125 "2021-03-12T06:15:14Z")
Hello Martin Yes for most parts I’ve been using the myStrom Adapter and it works gräbt. But the big kitchen appliances like Oven and Stove will most likely kill it. That’s why I am looking for a smart 3 phase that integrates with Homey (since that’s what I am using now). I‘ll wait and see what comes along in the next few weeks. I also found this Shelly 3EM thingy, looks way more flimsy but might do what I need, still looking into it Thanks for the input. ---
**Author:** ![Otter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/otter/32/11467_2.png) [@Otter](https://community.homey.app/u/Otter)\ **Post date:** [March 13, 2021, 7:27pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/126 "2021-03-13T19:27:32Z")
Wait a bit on the shelly 4proplus a 4 group 16a switch with power measurement ---
**Author:** ![Tangodelta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tangodelta/32/9471_2.png) [@Tangodelta](https://community.homey.app/u/Tangodelta)\ **Post date:** [May 11, 2021, 11:55am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/127 "2021-05-11T11:55:35Z")
dosent anymore ---
**Author:** ![Tangodelta](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tangodelta/32/9471_2.png) [@Tangodelta](https://community.homey.app/u/Tangodelta)\ **Post date:** [May 11, 2021, 4:09pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/128 "2021-05-11T16:09:23Z")
A firmware update solved Qubino Smart meter problems. QUBINO\_SmartMeterS2\_500\_EU\_20201109\_0900\_ZMNHTD1 H1S8P1\_\_v80.01\_\_5610F574 ---
**Author:** ![Jan\_Peeters](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jan_peeters/32/86660_2.png) [@Jan\_Peeters](https://community.homey.app/u/Jan_Peeters)\ **Post date:** [May 11, 2021, 11:51pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/129 "2021-05-11T23:51:20Z")
> [@Otter](#): > > shelly 4proplus > **[Shelly Pro 4PM - DIN rail Quad Relay Switch 4x 16A (LAN, WiFi, Bluetooth)](https://smarterhome.sk/en/shelly/shelly-4pro-plus-din-rail-quad-relay-switch-4x-16a-wifi-885.html)** > > Shelly Pro 4PM is the newest 4-way (4x16A) smart switch and the most powerful Wi-Fi switch for your automation solution. DIN rail installation Wi-Fi and Bluetooth Connected Optional LAN connectivity Store and script editor For four electrical... ---
**Author:** ![Otter](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/otter/32/11467_2.png) [@Otter](https://community.homey.app/u/Otter)\ **Post date:** [May 12, 2021, 4:09am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/130 "2021-05-12T04:09:30Z")
Its finally here? I watched last night if it was done already 😉 ---
**Author:** ![Martin\_Ahlert](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martin_ahlert/32/9579_2.png) [@Martin\_Ahlert](https://community.homey.app/u/Martin_Ahlert)\ **Post date:** [May 14, 2021, 10:00am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/131 "2021-05-14T10:00:00Z")
It also works fine with the Homee cubes ---
**Author:** ![HarmJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/harmj/32/9835_2.png) [@HarmJ](https://community.homey.app/u/HarmJ)\ **Post date:** [June 23, 2021, 7:13pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/132 "2021-06-23T19:13:58Z")
Is the meter still updating its values? ---
**Author:** ![Tundel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tundel/32/12939_2.png) [@Tundel](https://community.homey.app/u/Tundel)\ **Post date:** [August 2, 2021, 6:08pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/133 "2021-08-02T18:08:06Z")
Hi, there was a lot discuss and recommendations about different power meters. Now i’m a little confused, is Qubino ZMNHXD1 3-phase smart meter working fine with homey or not? ---
**Author:** ![HarmJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/harmj/32/9835_2.png) [@HarmJ](https://community.homey.app/u/HarmJ)\ **Post date:** [August 3, 2021, 6:59pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/134 "2021-08-03T18:59:20Z")
It is not 😉 ---
**Author:** ![Tundel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tundel/32/12939_2.png) [@Tundel](https://community.homey.app/u/Tundel)\ **Post date:** [August 4, 2021, 7:46pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/135 "2021-08-04T19:46:48Z")
😟 Then same, that is with Aeotec Gen 2 3 phase meter, that is not working correctly And it will not be, because old and EOL device. Almost, as Qubino 3 phase meter 😉 ---
**Author:** ![Wallinder](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wallinder/32/12691_2.png) [@Wallinder](https://community.homey.app/u/Wallinder)\ **Post date:** [August 18, 2021, 12:06pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/136 "2021-08-18T12:06:02Z")
Such a shame that Athom won’t add support for 3-phase smart meter. I requested it several times, but nothing happens. I’ve contacted one of the original app developers, but got the response that it is up to Athom now. After years of waiting I’m afraid that support for the 3-phase smart meter will never be added. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [August 18, 2021, 4:20pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/137 "2021-08-18T16:20:25Z")
![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/c/dcd82bf59fb5e172622c66662aba5fa21e1d4e90.jpeg) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/2/0/2022df671687770477a2fcf99ff99f35952bcdc0.png) Qubino is now responsable for the Qubino app, so maybe there is hope? ---
**Author:** ![Tundel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tundel/32/12939_2.png) [@Tundel](https://community.homey.app/u/Tundel)\ **Post date:** [August 18, 2021, 4:50pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/138 "2021-08-18T16:50:11Z")
It depends… Is a problem in Qubino side or Athom side. Hopefully they can figure it out and fix a issue in this year ---
**Author:** ![Tundel](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tundel/32/12939_2.png) [@Tundel](https://community.homey.app/u/Tundel)\ **Post date:** [August 18, 2021, 4:54pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/139 "2021-08-18T16:54:12Z")
At moment i have Qubino 3 phase meter and Aeotec second gen. 3 phase meter, neither does not work with Homey ---
**Author:** ![HarmJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/harmj/32/9835_2.png) [@HarmJ](https://community.homey.app/u/HarmJ)\ **Post date:** [August 19, 2021, 7:44am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/140 "2021-08-19T07:44:46Z")
I think this is a Athom issue. I added the 3 phase meter manually to the existing Qubino app. Homey is able to get the latest values if I restart the app so I don’t know why this should not work if Athom put some time in it. ---
**Author:** ![Top\_Homey](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/top_homey/32/13177_2.png) [@Top\_Homey](https://community.homey.app/u/Top_Homey)\ **Post date:** [August 20, 2021, 10:24am UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/141 "2021-08-20T10:24:28Z")
Let’s hope Qubino picks up the thread and ensures that the 3-phase meter is neatly included in the app. If it works well, more will be sold. Win Win situation. ---
**Author:** ![HarmJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/harmj/32/9835_2.png) [@HarmJ](https://community.homey.app/u/HarmJ)\ **Post date:** [August 23, 2021, 1:34pm UTC](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497/142 "2021-08-23T13:34:58Z")
Update from Qubino Hello Harm, The situation with the Qubino app for now is not clear yet as the Athom Homey give a chance to the Qubino to arrange the Qubino app instead of the Athom Homey developers. Since then, the final decision was not taken yet and for this the app was not developed further. The person in charge of this project is on vacation and it will be back at the end of August, like this we will have a decision about it beginning of September. Until then I will set the ticket On Hold, and we will let you know how the things will develop. [Previous page](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497.md?page=6) [Next page](https://community.homey.app/t/qubino-zmnhxd1-3-phase-smart-meter/5497.md?page=8)