# Qubino Smart Meter model compatibility **URL:** \ **Category:** Apps\ **Created:** [October 17, 2018, 9:45am UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927 "2018-10-17T09:45:36Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![stepic7](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stepic7/32/18659_2.png) [@stepic7](https://community.homey.app/u/stepic7)\ **Post date:** [October 17, 2018, 9:45am UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/1 "2018-10-17T09:45:36Z")
I saw a new app in Beta version for Qubino now it is compatible also with Qubino Smart Meter although it acknowledges model ZMNHTD this is a very good new as I was looking for an overall power meter compatible with Homey However the one that is now commercialized is model ZMNHTD1 I wonder there could be any preclusion with this new hardware thanks ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [October 17, 2018, 12:32pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/2 "2018-10-17T12:32:46Z")
![17-003](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/3/36114d9105e01de69e10c8fd3169d840ed375f2e.png) the “1” at the end stands for the used frequency, for Europ this is 868.4 MHz > **[Downloads-confirm - Qubino](http://qubino.com/downloads-confirm/#save)** > > Watch & learn. Save it for later. Warm up your fingers. Watch and learn. Control all of your shutters from the comfort of your couch Simulate Your Home Presence With Z-Wave Relay Mr. Qubino: Let There be Light! Create Your Own Waterfall The... ---
**Author:** ![stepic7](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/stepic7/32/18659_2.png) [@stepic7](https://community.homey.app/u/stepic7)\ **Post date:** [October 17, 2018, 2:55pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/3 "2018-10-17T14:55:51Z")
thanks a lot! ---
**Author:** ![cskogstrand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cskogstrand/32/1766_2.png) [@cskogstrand](https://community.homey.app/u/cskogstrand)\ **Post date:** [October 31, 2018, 2:02pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/4 "2018-10-31T14:02:06Z")
Does it work with the 3-phase Smart Meter (ZMNHXD)? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [October 31, 2018, 4:33pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/5 "2018-10-31T16:33:43Z")
You can find that here: [https://apps.athom.com/app/com.qubino](https://apps.athom.com/app/com.qubino) ---
**Author:** ![cskogstrand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cskogstrand/32/1766_2.png) [@cskogstrand](https://community.homey.app/u/cskogstrand)\ **Post date:** [October 31, 2018, 4:48pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/6 "2018-10-31T16:48:11Z")
It is not listed, I know. Just wondering if I can pair the ZMNHXD like a ZMNHTD in Homey since they are both Qubino Smart meters? ---
**Author:** ![Skee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skee/32/10468_2.png) [@Skee](https://community.homey.app/u/Skee)\ **Post date:** [December 18, 2018, 7:31pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/7 "2018-12-18T19:31:37Z")
I second this, I also want to buy a 3phase meter. ---
**Author:** ![cskogstrand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cskogstrand/32/1766_2.png) [@cskogstrand](https://community.homey.app/u/cskogstrand)\ **Post date:** [December 19, 2018, 2:29pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/8 "2018-12-19T14:29:36Z")
I bought one to test. Had to edit the source code for the Qubino app to get it working, but it was a pain to get it paired with Homey. Ended up buying Aeotec 3 phase meter instead… ---
**Author:** ![Skee](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/skee/32/10468_2.png) [@Skee](https://community.homey.app/u/Skee)\ **Post date:** [December 19, 2018, 2:36pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/9 "2018-12-19T14:36:18Z")
And i couldn’t get the aeotec 3phase you work. Wattage was on all rows. Ska prova quboni nu men väntar tills den stöds officiellt ---
**Author:** ![cskogstrand](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cskogstrand/32/1766_2.png) [@cskogstrand](https://community.homey.app/u/cskogstrand)\ **Post date:** [December 19, 2018, 5:39pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/10 "2018-12-19T17:39:12Z")
You have to buy the Aeotec that corresponds to your grid system. In Norway these are typically TN (400V) or IT(230V), and you will need two different products for 3 phase measuring on the different grid systems depending on which you have. 3phase3clamps for TN and 3phase2clamps for IT. But still it calculates kWh 3 times higher then it really is, so I created a virtual power meter to correct this value. See attached pic for my solution. ![Screenshot_20181219_183640](https://us1.discourse-cdn.com/flex025/uploads/athom/original/2X/7/7c7bdd504f784f8c248d23ab4a12f612eae97977.jpeg) ---
**Author:** ![Tronderbart](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tronderbart/32/17079_2.png) [@Tronderbart](https://community.homey.app/u/Tronderbart)\ **Post date:** [January 15, 2020, 7:51pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/11 "2020-01-15T19:51:31Z")
I had my electrician install two of the 1-phase smart meter (ZMNHTD?) yesterday. They are listed in te Qubino app as supported so I figured they would work, but they are impossible to pair. Anyone that have managed to include these to Homey? ---
**Author:** ![HarmJ](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/harmj/32/9835_2.png) [@HarmJ](https://community.homey.app/u/HarmJ)\ **Post date:** [January 15, 2020, 8:57pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/12 "2020-01-15T20:57:27Z")
It is possible that you need to update the firmware of the meter first. You can aks Qubino support for the firmware update file. You will need an uzb to update. Homey doesnt support ota update ---
**Author:** ![Tronderbart](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tronderbart/32/17079_2.png) [@Tronderbart](https://community.homey.app/u/Tronderbart)\ **Post date:** [January 15, 2020, 9:50pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/13 "2020-01-15T21:50:57Z")
Yes, I recon I could try that. Thank you for the reply! ---
**Author:** ![Tronderbart](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tronderbart/32/17079_2.png) [@Tronderbart](https://community.homey.app/u/Tronderbart)\ **Post date:** [January 26, 2020, 3:02pm UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/14 "2020-01-26T15:02:17Z")
Update: I got them included. Not by using the S-button, but simply turning the fuse on/of. They then entered exclusion mode. On/off again and they’re in inclusion mode. ---
**Author:** ![Tronderbart](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tronderbart/32/17079_2.png) [@Tronderbart](https://community.homey.app/u/Tronderbart)\ **Post date:** [August 31, 2022, 11:09am UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/16 "2022-08-31T11:09:57Z")
Hi! It has a “when”-card (“when power has changed”). I’m currently not using the “Strømregning”-app, so I use PaperTrails to fetch the monthly reading for me (Add to the log (text) Power Meter (Import). I then use this to calculate the monthly cost. Vensamt John Arne ---
**Author:** ![THN](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/thn/32/18363_2.png) [@THN](https://community.homey.app/u/THN)\ **Post date:** [August 31, 2022, 11:27am UTC](https://community.homey.app/t/qubino-smart-meter-model-compatibility/2927/17 "2022-08-31T11:27:05Z")
Thanks for the reply! 😀 (Just after posting I stumbled across the answer on a different [thread](https://community.homey.app/t/missing-or-wrong-things-in-the-qubino-app/55354/57) so thats why I deleted my question above)