# Qubino shutter- Fibaro shutter **URL:** \ **Category:** Questions & Help\ **Created:** [October 29, 2019, 7:30pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912 "2019-10-29T19:30:26Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Th\_sweere](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/th_sweere/32/17034_2.png) [@Th\_sweere](https://community.homey.app/u/Th_sweere)\ **Post date:** [October 29, 2019, 7:30pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912/1 "2019-10-29T19:30:26Z")
I tried adding a Qubino Flush Roller shutter module ZMNHCD1 on my Homey, unfortunately he does not recognize this device. Then I added Fibaro roller shutter 3. However, this works through a slider which is not good for my application because there is no stop position. Where I am looking for is a switch device that operates a motor for turning anti-clockwise, clockwise and a stop position. Could you advise me? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [October 30, 2019, 2:14pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912/2 "2019-10-30T14:14:04Z")
Maybe this is an option for you: you can make 3 flows for the Fibaro: 1 goto 100% 2 goto 50% 3 goto 0% these flows you can start via Virtual devices For the Qubino, you can request Athom an addition to the Qubino app for your device ZMNHCD1 ---
**Author:** ![Martijn\_Hoogenbosch](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/martijn_hoogenbosch/32/10647_2.png) [@Martijn\_Hoogenbosch](https://community.homey.app/u/Martijn_Hoogenbosch)\ **Post date:** [October 30, 2019, 3:51pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912/3 "2019-10-30T15:51:35Z")
[https://github.com/athombv/com.qubino/tree/beta](https://github.com/athombv/com.qubino/tree/beta) You could try and install the beta from cli. If you look at the changelog it reports: > Improved support for Flush Shutter (ZMNHCD) You could give it a try. Obviously since it is a beta and you can only install this version through cli, nobody gives you any guaranties. – except for max 😉 ---
**Author:** ![MadMax](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/madmax/32/10306_2.png) [@MadMax](https://community.homey.app/u/MadMax)\ **Post date:** [October 30, 2019, 3:59pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912/4 "2019-10-30T15:59:51Z")
With the Qubino beta App this works ---
**Author:** ![Th\_sweere](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/th_sweere/32/17034_2.png) [@Th\_sweere](https://community.homey.app/u/Th_sweere)\ **Post date:** [October 30, 2019, 6:41pm UTC](https://community.homey.app/t/qubino-shutter-fibaro-shutter/19912/5 "2019-10-30T18:41:00Z")
Jan , thank you for tour advice. I’ll try and as Athom how tour add the quibino shutter Gr Theo Verzonden vanaf Samsung-tablet. -------- Oorspronkelijk bericht --------