# Qubino modules still not reporting their status **URL:** \ **Category:** Devices\ **Created:** [December 6, 2025, 3:24pm UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481 "2025-12-06T15:24:14Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![ricercar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ricercar/32/101928_2.png) [@ricercar](https://community.homey.app/u/ricercar)\ **Post date:** [December 6, 2025, 3:24pm UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481/1 "2025-12-06T15:24:14Z")
5 years later, Athom hasn’t fixed the Qubino modules not reporting their status when actionned via the wall switch 😡 🤬 > [@Qubino Relay Switch does not report status to Home App even with App Version 3.02](https://community.homey.app/t/qubino-relay-switch-does-not-report-status-to-home-app-even-with-app-version-3-02/20438): > > After the update of the app from version 2 to 3 you have to (as announced) include all Qubino relays again. I have only 24 modules… A test with the first module shows that the status still doesn’t work. As soon as I switch a lamp on or off via the normal switch, the status in the Home App does not change. I wonder what has changed in the new version at all. In addition, the delay is approx. 1 second with every 2nd switching on… I’ve had trouble with Zipato. I think now ALL Qubino modules are … ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 6, 2025, 7:09pm UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481/2 "2025-12-06T19:09:04Z")
I haven’t read your old topic, but Athom isn’t responsible for the Homey Qubino app: ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/f/dfecd3d840fc904f7d0b4e17e2c81fedcd836558.png) ---
**Author:** ![ricercar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ricercar/32/101928_2.png) [@ricercar](https://community.homey.app/u/ricercar)\ **Post date:** [December 6, 2025, 7:29pm UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481/3 "2025-12-06T19:29:17Z")
There is a firmware update for this device but the Homey “official” app doesn’t allow it. I don’t know who other than Athom is responsible ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [December 6, 2025, 9:22pm UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481/4 "2025-12-06T21:22:45Z")
Homey can’t offer OTA updating at all, nothing any app can provide for. You’d best send a OTA feature request to homey.app/support. But, you probably can upgrade your devices with an Aeotec z-wave stick (just connect to PC/Laptop) without removing the device from Homey. Just search this forum for details / howto’s. Qubino is now part of Shelly btw. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [December 7, 2025, 11:42am UTC](https://community.homey.app/t/qubino-modules-still-not-reporting-their-status/146481/5 "2025-12-07T11:42:28Z")
According to Homey Podcast #3 from October 10, 2024, @Emile said that it’s technically possible to perform firmware updates for Z-Wave and Zigbee with the Homey Pro (early 2023), but this feature would have to be integrated by the app developers into their apps. Please take a look at this excerpt: [![](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/2/e24f57ccc6b27f0b5a7e4aa6fb143ca77809f525.jpeg "The Homey Podcast #3 • Talking Best Buy Guides with Dino • Smart Home Trends, IFA Highlights + More") ](https://www.youtube.com/watch?v=cYTS-St6AQg&t=2104) However, I have already been informed by two app developers that Athom doesn’t provide any information on how this feature should be implemented in the Homey apps. As @Peter_Kawa has already mentioned, it’s possible to update the firmware of Z-Wave devices using a workaround without having to remove the devices first. Here are the instructions for doing so: > **[Z -Stick Gen 5 (+) as Secondary Controller in Homey](https://aeotec.freshdesk.com/support/solutions/articles/6000263528-z-stick-gen-5-as-secondary-controller-in-homey)** > > With version 3.9.0x, the Z-Stick Gen5+ is recognized as a device in Homey and can be used as a secondary controller. What do you need this for: Firmware updates of devices Use of sensor data outside Homey Backup of network data Configura... However, I would still recommend contacting the app developer Qubino and also Athom. * * * By the way, “Official” doesn’t necessarily mean that the app is from Athom or the device manufacturer itself. Among other things, “Official” means that this app also works with a Homey Bridge and, for cloud services, even with the Homey Cloud. Furthermore, unlike community apps, these apps are better checked by Athom. Whatever that means.