# Qubino Flush Shutter DC: pairing problems and Flow question

**URL:** <https://community.homey.app/t/qubino-flush-shutter-dc-pairing-problems-and-flow-question/31535>\
**Category:** Questions & Help\
**Created:** [June 22, 2020, 8:35am UTC](https://community.homey.app/t/qubino-flush-shutter-dc-pairing-problems-and-flow-question/31535 "2020-06-22T08:35:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [June 22, 2020, 3:22pm UTC](https://community.homey.app/t/qubino-flush-shutter-dc-pairing-problems-and-flow-question/31535/2 "2020-06-22T15:22:07Z")

</div>

Welcome to this **community** forum, sorry to mention this but on me, you come in as a bit negative but OK.

> [@\[HOW TO\] Adding a Z-wave device to Homey](https://community.homey.app/t/how-to-adding-a-z-wave-device-to-homey/19148):
>
> Adding a Z-wave device to Homey This post is to try to help adding a Z-wave device to Homey. There is a lot of posts on the forums where Z-wave devices could not be added and where is stated that it must be a broken Z-wave chip then. Am not saying that’s impossible but most of the times it can be solved with below steps. If adding a Z-wave device is failing (for whatever reasons) then please try this below steps. Please try to follow the steps with love. Like where the PTP states to wait at …

Qubino devices are not less reliable than other brands and can very easily be added (included) by keeping Homey and the device close together as mentioned in many descriptions.  
First, remove (exclude) them (even when they have never been included before) via [Homey Developer Tools](https://developer.athom.com/tools/zwave) ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/5/8/580c2bdabdba553c806e349edef170f904d1b81c.png)  
Then un-power the device, go to the Devices include-page (+ in the upper corner, choose Homey, choose Z-Wave, press Install, then power-up the device again, follow the screen instructions.  
After inclusion, Homey and the device can be separated.

For opening and closing at a specific time/day you can use the Alarm settings that you can find on the page after pressing More (second item)

---

_[View the full topic](https://community.homey.app/t/qubino-flush-shutter-dc-pairing-problems-and-flow-question/31535)._