# Qubino Flush dimmers disappear

**URL:** <https://community.homey.app/t/qubino-flush-dimmers-disappear/1258>\
**Category:** Devices\
**Tags:** z-wave\
**Created:** [September 7, 2018, 11:31am UTC](https://community.homey.app/t/qubino-flush-dimmers-disappear/1258 "2018-09-07T11:31:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Wiebe](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wiebe/32/438_2.png) [@Wiebe](https://community.homey.app/u/Wiebe)\
**Post date:** [September 7, 2018, 11:31am UTC](https://community.homey.app/t/qubino-flush-dimmers-disappear/1258/1 "2018-09-07T11:31:37Z")

</div>

Hi,

I’ve recently switched from Zipato to Homey, and reconnected all my z-wave devices (about 30 or so) to Homey. Quite an improvement I must say.

Now I run into the problem that some of my Qubino Flush 2 Dimmers are just disappearing. They still work with switches, but they are just completely gone from the Homey UI. About 5 of them are already gone.

Is anyone else experiencing this, can you recommend any actions, or alternative devices that might work better? The Fibaro ones maybe?

Is it possible that when I use '“z-wave settings -\> remove a device”, and I have not set the device in inclusion mode, they still are removed from the z-wave network if I’m close?

Thanks!

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [August 28, 2024, 2:38pm UTC](https://community.homey.app/t/qubino-flush-dimmers-disappear/1258/2 "2024-08-28T14:38:22Z")

</div>