# Qubino Flush Dimmer manual state change doesnt be reported to homey **URL:** \ **Category:** Devices\ **Tags:** z-wave\ **Created:** [February 13, 2019, 6:17am UTC](https://community.homey.app/t/qubino-flush-dimmer-manual-state-change-doesnt-be-reported-to-homey/9127 "2019-02-13T06:17:36Z")\ **Posts on this page:** 1\ **Showing post:** 9
**Author:** ![Dominique\_Vanhessche](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dominique_vanhessche/32/17154_2.png) [@Dominique\_Vanhessche](https://community.homey.app/u/Dominique_Vanhessche)\ **Post date:** [March 2, 2021, 1:44pm UTC](https://community.homey.app/t/qubino-flush-dimmer-manual-state-change-doesnt-be-reported-to-homey/9127/9 "2021-03-02T13:44:15Z")
> [@Qubino Relay Switch does not report status to Home App even with App Version 3.02](https://community.homey.app/t/qubino-relay-switch-does-not-report-status-to-home-app-even-with-app-version-3-02/20438/11): > > I also had the problem that there was no new status sended to Homey when I used the wall switch. After a long search I could fix it !! In my case, I use Schaiger ZHS01 (it is the same as Qubino ZMNHDD1). I only use I1. So I had to change the settings and disable I2 and I3 (parameter 100 and 101) and after that I had to do an exclusion of the module and then again an inclusion of the module. From then, everything is working well and the status change now also when I use the wall switch. Also th… --- _[View the full topic](https://community.homey.app/t/qubino-flush-dimmer-manual-state-change-doesnt-be-reported-to-homey/9127)._