# Qubino flush dimmer - can’t get input 2 working

**URL:** <https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737>\
**Category:** Devices\
**Created:** [January 22, 2019, 11:19pm UTC](https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737 "2019-01-22T23:19:49Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![Wilfried](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/wilfried/32/12969_2.png) [@Wilfried](https://community.homey.app/u/Wilfried)\
**Post date:** [January 4, 2020, 3:06pm UTC](https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737/17 "2020-01-04T15:06:53Z")

</div>

Hello everyone,  
I have the same problem with Qubino flush dimmers running app version (3.1.1). As discussed in this post, manual state change is not reported to homey. ([Qubino Flush Dimmer manual state change doesnt be reported to homey](https://community.homey.app/t/qubino-flush-dimmer-manual-state-change-doesnt-be-reported-to-homey/9127)). I think that’s why switching I2 or I3 doesn’t show any reaction in the flow.

I have set up my installation to use I2 and I3. With 16 switches that cost a lot of money for the electrician.

**Maybe we should all write to support to make it clear that the problem is important.**

---

_[View the full topic](https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737)._