# Qubino Flush dimmer 0-10v Parameter 52 **URL:** \ **Category:** Questions & Help\ **Created:** [March 9, 2020, 10:07am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909 "2020-03-09T10:07:44Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [March 9, 2020, 10:07am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/1 "2020-03-09T10:07:44Z")
I’ve tried using this dimmer to control my light via a 0-10v dimmer and an 0-10v input signal. Trying to make a dimmer smart. The dimming works via tha app. But it doesn’t react to the 0-10v input signal. I think i need to set the nr 52 parameter to auto, as stated in the manual: “the parameter no. 1 is set to the values 3, 4 or 5 (the output of the device will be automatically controlled by the reading obtained from the sensor), this parameter should be set to the value 1 – Auto.” But I can’t find it in the homey advanced settings. Does anyone have an idea how i can set this parameter? ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [March 9, 2020, 10:17am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/2 "2020-03-09T10:17:54Z")
Parameter 52 is in the advanced settings, it is called “Control type” under “Inputs” header ---
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [March 9, 2020, 10:31am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/3 "2020-03-09T10:31:45Z")
Caseda, thank you for your reply, but I think this is the parameter nr 1, where you set the type of switch that is connected. But I need to set parameter nr 52, and that’s the one I can’t find. ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [March 9, 2020, 10:45am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/4 "2020-03-09T10:45:09Z")
No that is “Switch type” (1) not “Control type” (52), just check the description when you click on it, it will tell you the parameter number too. Would have shown you a screenshot, but still need to re-include mine after the v2 rewrite 🤣 I’ve been lazy. ---
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [March 9, 2020, 11:08am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/5 "2020-03-09T11:08:12Z")
Hmm strange. Under Inputs I only have 2 settings, Switch type (1) and Double click (21). But can’t I set this value using the raw data? (52,1,1) ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [March 9, 2020, 11:14am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/6 "2020-03-09T11:14:27Z")
Then you might have found a bug, or use an old version of the app, I’ll see if I can reproduce this evening. Yes you can also do raw parameters, the way you’ve written it is the right way. ---
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [March 9, 2020, 12:45pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/7 "2020-03-09T12:45:53Z")
I installed the Qubino app only this weekend, so it should be rather up-to-date 🙂 but maybe it can be a clue that I’m using the dutch language version? ---
**Author:** ![Caseda](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/caseda/32/138695_2.png) [@Caseda](https://community.homey.app/u/Caseda)\ **Post date:** [March 9, 2020, 12:47pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/8 "2020-03-09T12:47:25Z")
That shouldn’t matter, if there is no translation available then it will always fall back to English. ---
**Author:** ![Adrian\_Rockall](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/adrian_rockall/32/13209_2.png) [@Adrian\_Rockall](https://community.homey.app/u/Adrian_Rockall)\ **Post date:** [March 9, 2020, 1:35pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/9 "2020-03-09T13:35:21Z")
Have you tried to set the switch input type to 3,4, or 5 and then removed and added the device to Homey again without resetting it? Maybe parameter 52 is only reported during pairing if parameter 1 requires it. I use a toggle switch so I can’t say for sure but I don’t see parameter 52 either. ---
**Author:** ![Dave1](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dave1/32/22564_2.png) [@Dave1](https://community.homey.app/u/Dave1)\ **Post date:** [March 11, 2020, 9:15am UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/10 "2020-03-11T09:15:13Z")
Hi Adrain, Yes I did that, but if I follow the instructions (change the input type, then exclude and include again), the input type is set back to the original value. So I tried changing the parameter nr 52. But when I do that the module stops reacting completely. Can’t change it using the fysical input, nor in the homey app. If i do a factory reset, change the input type, then it works again. Until I try to set param 52. ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [March 12, 2020, 5:19pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/11 "2020-03-12T17:19:59Z")
Did you try the RAW-Parameter setting 52,1,1 and also 1,1,4 and then Exclude (not reset) and after some time, include again? ---
**Author:** ![Nikita\_Nikitin](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/nikita_nikitin/32/16947_2.png) [@Nikita\_Nikitin](https://community.homey.app/u/Nikita_Nikitin)\ **Post date:** [November 12, 2020, 3:45pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/12 "2020-11-12T15:45:12Z")
Hi. I tried yesterday to change Switch type input 1 in the advance tab. I did as following: change the input in the advanced tab to desired position (5 in my case) and save it, than take out power cord to Qubino 0-10 dimmer (so it’s without power) for 30 seconds, re-start Homey application, return Qubino to power. In the Homey developer Qubino’ device tab I have SwitchTypeInput1 changed to 5. But Qubino didn’t react to the device I use as general purpose sensor, maybe I should use Potentiometr as input signal. And what did you do exclude and include your Qubino to your network? ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [August 28, 2024, 2:37pm UTC](https://community.homey.app/t/qubino-flush-dimmer-0-10v-parameter-52/26909/13 "2024-08-28T14:37:17Z")
Closed on August 28, 2024, 2:37pm UTC