# Qubino dimmer to trigger flows from input i2 and i3? **URL:** \ **Category:** Apps\ **Tags:** z-wave, flow\ **Created:** [February 23, 2020, 5:12pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307 "2020-02-23T17:12:01Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [August 26, 2021, 5:00pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/5 "2021-08-26T17:00:21Z")
Configuration parameters Parameter no. 1 Input 1 switch type Available config. parameters (data type is 1 Byte DEC):  default value 0  0 mono stable switch type (push button) button quick press turns between previous set Dimmer value and zero  1 bi stable switch type NOTE: Switch connected to S1 terminal is a master switch. It activates the basic functionality of the Dimmer Parameter no. 2 Input 2 switch type Available config. parameters (data type is 1 Byte  default value 0  0 mono stable switch type (push button) button quick press turns between previous set Dimmer value and zero  1 bi stable switch type NOTE: to enable this function, Parameter 20 or Parameter 100 has to be set. Parameter no. 3 Input 2 contact type Available config. parameters (data type is 1 Byte  default value 0  0 NO (normally open) input type  1 NC (normally close) input type Parameter no. 4 Input 3 contact type Available config. parameters (data type is 1 Byte  default value 0  0 NO (normally open) input type  1 NC (normally close) input type Parameter no. 20 Enable Disable 3way switch / additional switch Dimming is done by push b utton or switch connected to I1 (by default). Enabling 3way switch dimming can be controlled by push button or switch connected to I1 and I2 . Available config. parameters (data type is 1 Byte  default value 0  0 single push button (connected to  1 3 way switch (connected to I1 and I2)  2 Additional switch (connected to I2) > [@Qubino flush dimmer - can’t get input 2 working](https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737/20): > > Right. With the help of Qubino support I have solved how to get my input I2 working on a Flush 1 Relay. Maybe it is useful for the other relays and dimmers as well. I had already set the parameter 100 to 9, excluded and included again. And I set group 3 to 1.1, being Homey. But switching input I2 gave no result in flows, but did in the log. See above. I send the log to Qubino and this was the answer: When you activate the I2 or I3 exclude and include the device, the mode of communication is c… --- _[View the full topic](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307)._