# Qubino dimmer to trigger flows from input i2 and i3? **URL:** \ **Category:** Apps\ **Tags:** z-wave, flow\ **Created:** [February 23, 2020, 5:12pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307 "2020-02-23T17:12:01Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![ajoj](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ajoj/32/16614_2.png) [@ajoj](https://community.homey.app/u/ajoj)\ **Post date:** [February 23, 2020, 5:12pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/1 "2020-02-23T17:12:01Z")
I’m considering to switch to Homey but I have many (10+) Qubino flush z-wave dimmers and want to make sure that Homey is compatible with the Qubino dimmers first. Curently I’m using the extra inputs (i2 and i3) on several of the Qubino dimmers to trigger different scens (flows). I found on z-wave.se/comp/ that the inputs i2 and i3 cannot be used to trigger flows. Does anyone here know it that is still the case? That would definitely be a show stopper for me. Thanks in advance! ---
**Author:** ![JonasW](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jonasw/32/9425_2.png) [@JonasW](https://community.homey.app/u/JonasW)\ **Post date:** [February 23, 2020, 8:51pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/2 "2020-02-23T20:51:39Z")
Yes. You can use i2 and i3 to trigger flows. ---
**Author:** ![ajoj](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ajoj/32/16614_2.png) [@ajoj](https://community.homey.app/u/ajoj)\ **Post date:** [February 24, 2020, 5:56am UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/3 "2020-02-24T05:56:50Z")
Great. Thanks! ---
**Author:** ![Fac3](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/fac3/32/4550_2.png) [@Fac3](https://community.homey.app/u/Fac3)\ **Post date:** [August 26, 2021, 3:57pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/4 "2021-08-26T15:57:17Z")
Hi Jonas, It seems that this feature does not work at me. Is there anything under the advanced settings what needs to be set? ---
**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\ **Post date:** [August 26, 2021, 5:00pm UTC](https://community.homey.app/t/qubino-dimmer-to-trigger-flows-from-input-i2-and-i3/26307/5 "2021-08-26T17:00:21Z")
Configuration parameters Parameter no. 1 Input 1 switch type Available config. parameters (data type is 1 Byte DEC):  default value 0  0 mono stable switch type (push button) button quick press turns between previous set Dimmer value and zero  1 bi stable switch type NOTE: Switch connected to S1 terminal is a master switch. It activates the basic functionality of the Dimmer Parameter no. 2 Input 2 switch type Available config. parameters (data type is 1 Byte  default value 0  0 mono stable switch type (push button) button quick press turns between previous set Dimmer value and zero  1 bi stable switch type NOTE: to enable this function, Parameter 20 or Parameter 100 has to be set. Parameter no. 3 Input 2 contact type Available config. parameters (data type is 1 Byte  default value 0  0 NO (normally open) input type  1 NC (normally close) input type Parameter no. 4 Input 3 contact type Available config. parameters (data type is 1 Byte  default value 0  0 NO (normally open) input type  1 NC (normally close) input type Parameter no. 20 Enable Disable 3way switch / additional switch Dimming is done by push b utton or switch connected to I1 (by default). Enabling 3way switch dimming can be controlled by push button or switch connected to I1 and I2 . Available config. parameters (data type is 1 Byte  default value 0  0 single push button (connected to  1 3 way switch (connected to I1 and I2)  2 Additional switch (connected to I2) > [@Qubino flush dimmer - can’t get input 2 working](https://community.homey.app/t/qubino-flush-dimmer-can-t-get-input-2-working/7737/20): > > Right. With the help of Qubino support I have solved how to get my input I2 working on a Flush 1 Relay. Maybe it is useful for the other relays and dimmers as well. I had already set the parameter 100 to 9, excluded and included again. And I set group 3 to 1.1, being Homey. But switching input I2 gave no result in flows, but did in the log. See above. I send the log to Qubino and this was the answer: When you activate the I2 or I3 exclude and include the device, the mode of communication is c…