# Problem controlling roller blinds with scene from Fibaro dimmer 2

**URL:** <https://community.homey.app/t/problem-controlling-roller-blinds-with-scene-from-fibaro-dimmer-2/34411>\
**Category:** Questions & Help\
**Tags:** flow\
**Created:** [September 6, 2020, 2:11pm UTC](https://community.homey.app/t/problem-controlling-roller-blinds-with-scene-from-fibaro-dimmer-2/34411 "2020-09-06T14:11:36Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![Robin\_Lunden](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robin_lunden/32/12626_2.png) [@Robin\_Lunden](https://community.homey.app/u/Robin_Lunden)\
**Post date:** [July 9, 2022, 6:06am UTC](https://community.homey.app/t/problem-controlling-roller-blinds-with-scene-from-fibaro-dimmer-2/34411/6 "2022-07-09T06:06:01Z")

</div>

I think I have found the solution. The settings in the fibaro may be the porblem. I have a flow to open and a flow to close the curtains. They work fine if I test them form the flow editor, but very weirdly when I press the fiber buttons. Check out this thread:

> [@Activate flows using Fibaro Switch 2 scene activation](https://community.homey.app/t/activate-flows-using-fibaro-switch-2-scene-activation/2680/4):
>
> Looking at the manual, the scenes are disabled by default. Maybe try enable the scenes by writing raw values on parameters 28 and/or 29. In your case for S1 double click, you need to write value 2 on parameter 28 (of size 1 byte according with the manual). So you should write 28,1,2 (parameter number,size,value) Then hit Save Settings.

Basically paste in the following in the raw configuration and save it:

**If you want to try out the raw configuration (to “resend” it), you can add `28,1,15;29,1,15`**

I’m so relieved that this problem I solved!

---

_[View the full topic](https://community.homey.app/t/problem-controlling-roller-blinds-with-scene-from-fibaro-dimmer-2/34411)._