# Power and energy are not updated (Qubino and Fibaro) **URL:** \ **Category:** Questions & Help\ **Tags:** z-wave, energy\ **Created:** [May 30, 2021, 8:17am UTC](https://community.homey.app/t/power-and-energy-are-not-updated-qubino-and-fibaro/47940 "2021-05-30T08:17:55Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [May 30, 2021, 9:20am UTC](https://community.homey.app/t/power-and-energy-are-not-updated-qubino-and-fibaro/47940/2 "2021-05-30T09:20:20Z")
I have some similar problems with Fibaro Walli Switch (FGWDSEU-221): – same settings – same hardware firmware – different date when I added these devices (= different Homey FW and different Fibaro app version!) ![Bildschirmfoto 2021-05-30 um 10.55.14](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/1/8/18919e346356a30e675101c24b22f3f02b56452d.png) ![Bildschirmfoto 2021-05-30 um 10.55.02](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/7/c7091fb42c40b5c17f516ee2ce065141c372d987.png) The left one “Walli Switch HWR” was added some month ago. The right one “Walli Switch Spiegellicht Bad” was added some days ago. So I guess Athom made some changes at the Homey firmware and/or the Fibaro app between the first and the second installation. Is that the case for you as well? Regarding the Fibaro RS2 please read this [thread](https://community.homey.app/t/grouping-fibaro-roller-shutter-not-working-with-group-app/47745). Conclusion of this thread From my point of view, there are two possibilities that cause the problem: – different installation date (as already mentioned) – different “blind position” report type (but you say that the parameter are equal, so this can’t be the point) Anyway, I would like to ask you to inform Athom about the problem. --- _[View the full topic](https://community.homey.app/t/power-and-energy-are-not-updated-qubino-and-fibaro/47940)._