# Popp Z-Wave Smoke Detector & Siren do not show up in devices list

**URL:** <https://community.homey.app/t/popp-z-wave-smoke-detector-siren-do-not-show-up-in-devices-list/19098>\
**Category:** Devices\
**Tags:** z-wave\
**Created:** [October 10, 2019, 3:08pm UTC](https://community.homey.app/t/popp-z-wave-smoke-detector-siren-do-not-show-up-in-devices-list/19098 "2019-10-10T15:08:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jojobaoil](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jojobaoil/32/16266_2.png) [@Jojobaoil](https://community.homey.app/u/Jojobaoil)\
**Post date:** [October 10, 2019, 3:08pm UTC](https://community.homey.app/t/popp-z-wave-smoke-detector-siren-do-not-show-up-in-devices-list/19098/1 "2019-10-10T15:08:55Z")

</div>

Hey Community,

I just wanted to add my five Popp Z-Wave Smoke Detector & Siren devices to my brand new Homey. Doing so it worked great with the first one. But beginning with the second device, the inclusion into the z-wave network seems to work (it show that it is being configured for about 30 seconds), but the device does not show up in the devices list afterwards. Does anyone ever had this problem and knows a solution?  
I am even able to remove the not showing devices from the z-wave network… so they are included, but do just not show up anywhere…

---

<div class="post-metadata">

**Author:** ![Rocodamelshekima](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rocodamelshekima/32/8209_2.png) [@Rocodamelshekima](https://community.homey.app/u/Rocodamelshekima)\
**Post date:** [October 10, 2019, 3:28pm UTC](https://community.homey.app/t/popp-z-wave-smoke-detector-siren-do-not-show-up-in-devices-list/19098/2 "2019-10-10T15:28:56Z")

</div>

> [@Jojobaoil](#):
>
> I am even able to remove the not showing devices from the z-wave network… so they are included

This is not true. U can remove a device even if it’s not included!

Maybe u can try this:

1. [PTP](https://community.homey.app/t/ptp-howto/17304)  
1a. Hold the device VERY close to Homey!
2. Remove the device from [the developer tools](https://developer.athom.com/tools/zwave) (even if it’s not included yes!)
3. [Reset](https://community.homey.app/t/reset-your-device-before-adding-it-to-homey/8924) ur device to factory defaults.
4. Try to add it again.
5. If no succes start over from number 2.

---

<div class="post-metadata">

**Author:** ![Jojobaoil](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jojobaoil/32/16266_2.png) [@Jojobaoil](https://community.homey.app/u/Jojobaoil)\
**Post date:** [October 11, 2019, 10:14am UTC](https://community.homey.app/t/popp-z-wave-smoke-detector-siren-do-not-show-up-in-devices-list/19098/3 "2019-10-11T10:14:18Z")

</div>

Hey Rocodamelshe,

thanks alot for the tip with the developer tools. This was the key. The inclusion over my Homey iOS App under iOS 13.2 did not work no matter how often I tried, but it worked instantly over the developer page. 🙂