# Plugwise ANNA

**URL:** <https://community.homey.app/t/plugwise-anna/31413>\
**Category:** Vragen & hulp\
**Created:** [June 18, 2020, 6:37pm UTC](https://community.homey.app/t/plugwise-anna/31413 "2020-06-18T18:37:34Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arie\_Markesteijn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_markesteijn/32/16566_2.png) [@Arie\_Markesteijn](https://community.homey.app/u/Arie_Markesteijn)\
**Post date:** [June 18, 2020, 6:37pm UTC](https://community.homey.app/t/plugwise-anna/31413/1 "2020-06-18T18:37:34Z")

</div>

Why does the app not show the temp requested? It only shows the actual roomtemp.

---

<div class="post-metadata">

**Author:** ![rampage](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rampage/32/2121_2.png) [@rampage](https://community.homey.app/u/rampage)\
**Post date:** [June 19, 2020, 12:58pm UTC](https://community.homey.app/t/plugwise-anna/31413/2 "2020-06-19T12:58:29Z")

</div>

Where? In the devices tab?

---

<div class="post-metadata">

**Author:** ![Arie\_Markesteijn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_markesteijn/32/16566_2.png) [@Arie\_Markesteijn](https://community.homey.app/u/Arie_Markesteijn)\
**Post date:** [June 19, 2020, 3:47pm UTC](https://community.homey.app/t/plugwise-anna/31413/3 "2020-06-19T15:47:14Z")

</div>

In the flow reference. Temp requested shows hyphen ie “-” no value.

Ik like to use it for calculating the temp difference between requested and measured temp.

---

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [June 20, 2020, 7:51am UTC](https://community.homey.app/t/plugwise-anna/31413/4 "2020-06-20T07:51:21Z")

</div>

I have the same problem and think that there is a problem with Anna it self. I can’t connect to it with the app.

---

<div class="post-metadata">

**Author:** ![Arie\_Markesteijn](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/arie_markesteijn/32/16566_2.png) [@Arie\_Markesteijn](https://community.homey.app/u/Arie_Markesteijn)\
**Post date:** [June 20, 2020, 9:49am UTC](https://community.homey.app/t/plugwise-anna/31413/5 "2020-06-20T09:49:30Z")

</div>

Works fine with my app.

---

<div class="post-metadata">

**Author:** ![rampage](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rampage/32/2121_2.png) [@rampage](https://community.homey.app/u/rampage)\
**Post date:** [June 21, 2020, 9:26pm UTC](https://community.homey.app/t/plugwise-anna/31413/6 "2020-06-21T21:26:22Z")

</div>

You should e-mail Plugwise support about that.

---

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [June 22, 2020, 7:07am UTC](https://community.homey.app/t/plugwise-anna/31413/7 "2020-06-22T07:07:35Z")

</div>

My mistake… I still was using the 2017 app for the GSM, so that is working again.  
Also the old app for Homey, because the new app doesn’t include all the stuff the old one was giving like water pressure and LUX.  
Hopefully they will include that soon.

---

<div class="post-metadata">

**Author:** ![Slof](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/slof/32/1318_2.png) [@Slof](https://community.homey.app/u/Slof)\
**Post date:** [June 22, 2020, 4:10pm UTC](https://community.homey.app/t/plugwise-anna/31413/8 "2020-06-22T16:10:56Z")

</div>

@TedTolboom can you say if there is maybe a change that this will be updated in the future?