# Pir sensor **URL:** \ **Category:** Devices\ **Created:** [August 25, 2025, 7:00pm UTC](https://community.homey.app/t/pir-sensor/142243 "2025-08-25T19:00:11Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [August 25, 2025, 8:06pm UTC](https://community.homey.app/t/pir-sensor/142243/2 "2025-08-25T20:06:34Z")
Hello Frico, I remembered you requested it a few days ago: > [@\[APP\]\[Pro\] SONOFF Zigbee](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/427): > > Subject: Request to add support for Zigbee Motion Sensor ZG-204Z Hello, I have a Zigbee Motion Sensor with the following details: Model: ZG-204Z Manufacturer: HOBEIAN Role: enddevice Wireless: Zigbee 3.0 Battery: CR2450 When pairing with Homey Pro, it is only recognized as a Generic Zigbee device. It does not show up as a motion sensor, so I cannot use it properly in flows. Could you please add support for this device in the Sonoff Zigbee app? Thank you very much! And I adviced: > [@\[APP\]\[Pro\] SONOFF Zigbee](https://community.homey.app/t/app-pro-sonoff-zigbee/36418/428): > > This seems to be a [Tuya Whitelabel device](https://www.zigbee2mqtt.io/devices/ZG-204Z.html); > Try adding it again after installing the test version of [Tuya zigbee app](https://community.homey.app/t/app-pro-tuya-zigbee-app/26439), and cross fingers. > > ![Screenshot_20250819_224250_Chrome](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/9/1/91e7582c70366a963d0eec096e3a4a1a7662b999.jpeg) > > (Tuya tends to use different firmware and device ID’s in exactly the same device models) . How did that go? No success? If not, did you follow the device request instruction at post 1 of the aforementioned Tuya zigbee app topic? --- _[View the full topic](https://community.homey.app/t/pir-sensor/142243)._