# Noname remote controll

**URL:** <https://community.homey.app/t/noname-remote-controll/90767>\
**Category:** Questions & Help\
**Created:** [October 2, 2023, 1:36pm UTC](https://community.homey.app/t/noname-remote-controll/90767 "2023-10-02T13:36:45Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tamas\_Kovacs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tamas_kovacs/32/80084_2.png) [@Tamas\_Kovacs](https://community.homey.app/u/Tamas_Kovacs)\
**Post date:** [October 2, 2023, 1:36pm UTC](https://community.homey.app/t/noname-remote-controll/90767/1 "2023-10-02T13:36:45Z")

</div>

Hello!  
Anyone will recognize this remote control. For me, this controls the shutters. I would be very happy if Homey could make friends with him too 🙂

 ![20231002_152442](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/d/9/d99dcd9afcc7676833c158c422f6615e30a6827c.jpeg)  
 ![20231002_152447](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/5/35877d8a4fd7214fb0b6ed0bde88ca3d2df65472.jpeg)  
Thank you!  
Tamas

---

<div class="post-metadata">

**Author:** ![Gijsb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/gijsb/32/48535_2.png) [@Gijsb](https://community.homey.app/u/Gijsb)\
**Post date:** [October 2, 2023, 1:53pm UTC](https://community.homey.app/t/noname-remote-controll/90767/2 "2023-10-02T13:53:32Z")

</div>

> **[COSMO | HT - Mobilus Motor](https://mobilus.pl/en/mobilus-products/sterowanie-mobilus/sterowanie-radiowe-mobilus/cosmo-ht/)**

---

<div class="post-metadata">

**Author:** ![Tamas\_Kovacs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tamas_kovacs/32/80084_2.png) [@Tamas\_Kovacs](https://community.homey.app/u/Tamas_Kovacs)\
**Post date:** [October 2, 2023, 2:01pm UTC](https://community.homey.app/t/noname-remote-controll/90767/3 "2023-10-02T14:01:28Z")

</div>

This is it!  
Thank U!  
And is there an app that works with HomeyPro?

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [October 2, 2023, 5:22pm UTC](https://community.homey.app/t/noname-remote-controll/90767/4 "2023-10-02T17:22:06Z")

</div>

Try this: [Mob.iq App voor Homey | Homey](https://homey.app/nl-nl/app/pl.mobilus.mobiq/Mob.iq/)

---

<div class="post-metadata">

**Author:** ![Tamas\_Kovacs](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tamas_kovacs/32/80084_2.png) [@Tamas\_Kovacs](https://community.homey.app/u/Tamas_Kovacs)\
**Post date:** [October 2, 2023, 6:26pm UTC](https://community.homey.app/t/noname-remote-controll/90767/5 "2023-10-02T18:26:48Z")

</div>

Yeah!  
Thank you!  
I tried this app before, but unfortunately without success. Because my Mobilus motors are older models, Older than 2017, they do not yet support the 2way comm format, as far as I know. And the remote control knows the old one too. Unfortunately, if I put the engine in program mode, the app can’t find it. I was hoping that there was an app that knew the older protocol as well… Is it a dead end?

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [October 3, 2023, 3:03pm UTC](https://community.homey.app/t/noname-remote-controll/90767/6 "2023-10-03T15:03:56Z")

</div>

Contact the App writer: [Issues · Tymec/pl.mobilus.mobiq · GitHub](https://github.com/Tymec/pl.mobilus.mobiq/issues)
