# No zigbee mesh after Homey v3.2.1-rc.7

**URL:** <https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164>\
**Category:** Questions & Help\
**Created:** [January 10, 2020, 9:37am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164 "2020-01-10T09:37:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hplos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hplos/32/10096_2.png) [@hplos](https://community.homey.app/u/hplos)\
**Post date:** [January 10, 2020, 9:37am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164/1 "2020-01-10T09:37:25Z")

</div>

This week I installed the new RC7 firmware. Stating up took around 10 min.  
I think another 10 min. before I could use my switches and lights.

Now I checked my zigbee network and all devices are connected directly to my homey in stead of a mesh with Ikea bulbs as routers.

---

<div class="post-metadata">

**Author:** ![CyberSponk](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cybersponk/32/8334_2.png) [@CyberSponk](https://community.homey.app/u/CyberSponk)\
**Post date:** [January 10, 2020, 9:44am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164/2 "2020-01-10T09:44:33Z")

</div>

There is a newer: RC8 \> [https://firmware.athom.com](https://firmware.athom.com)

---

<div class="post-metadata">

**Author:** ![hplos](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/hplos/32/10096_2.png) [@hplos](https://community.homey.app/u/hplos)\
**Post date:** [January 10, 2020, 9:49am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164/3 "2020-01-10T09:49:07Z")

</div>

I know, but there is no new changelog (always the same with rc-updates, so a new rc-update had no changes…? \<-- stupid that there is no changelog for every rc update)

And I’m a little afraid to update again with a rc version, because it feels buggy this time.

---

<div class="post-metadata">

**Author:** ![robertklep](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/robertklep/32/160628_2.png) [@robertklep](https://community.homey.app/u/robertklep)\
**Post date:** [January 10, 2020, 10:21am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164/4 "2020-01-10T10:21:44Z")

</div>

It’s not unheard of that it takes up to 20 minutes for Homey’s Zigbee to “settle” and start working (although this probably won’t happen each time, but usually after a firmware update). It usually can also take a while before you see the actual routes within your network.

---

<div class="post-metadata">

**Author:** ![danone](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/danone/32/115743_2.png) [@danone](https://community.homey.app/u/danone)\
**Post date:** [January 10, 2020, 11:03am UTC](https://community.homey.app/t/no-zigbee-mesh-after-homey-v3-2-1-rc-7/24164/5 "2020-01-10T11:03:32Z")

</div>

> [@hplos](#):
>
> but there is no new changelog

From Slack:

 ![Screen Shot 2020-01-10 at 10.02.58 pm](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/7/6/76fe5f47439e24b445ab840d169fb84761fc8a7c.png)