# No power consumption update in Qubino app

**URL:** <https://community.homey.app/t/no-power-consumption-update-in-qubino-app/40266>\
**Category:** Apps\
**Tags:** app, z-wave\
**Created:** [January 1, 2021, 9:36pm UTC](https://community.homey.app/t/no-power-consumption-update-in-qubino-app/40266 "2021-01-01T21:36:24Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zev](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zev/32/33261_2.png) [@Zev](https://community.homey.app/u/Zev)\
**Post date:** [January 1, 2021, 9:36pm UTC](https://community.homey.app/t/no-power-consumption-update-in-qubino-app/40266/1 "2021-01-01T21:36:24Z")

</div>

Hi there,

I bought a Qubino smart plug (ZMNHYD) and added it to the Zwave network. Although I am able to switch the smart plug on and off, the homey app doesn’t show power consumption updates.  
Homey firmware: 4.2.0.

I checked Homey Developer ZWAVE logging when setting parameters 40 and 42 (42 for setting the Interval in seconds in which the power consumption in Watts is reported to Homey). I noticed that:

1. commands are sent and
2. setting parameter 40 to 60 (seconds) results in a ZWAVE logging per minute.

It seems that the smart plug is working, but the app shows no power values. Implemented flows do not trigger either. What did I do wrong or how can I fix this?  
What I noticed is that the flag is “Unreachable” or “-”. Is security missing? The manual mentions that security is supported by the smart plug, but is it necessary and if so how can I set/implement it?

 ![image](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/3/8/38326f4b3296cf6b64f1eea0d3f3e8b0e6fe0161.png)

Thanks in advance,

Zev

---

<div class="post-metadata">

**Author:** ![JPe4619](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/jpe4619/32/9017_2.png) [@JPe4619](https://community.homey.app/u/JPe4619)\
**Post date:** [January 2, 2021, 6:35pm UTC](https://community.homey.app/t/no-power-consumption-update-in-qubino-app/40266/2 "2021-01-02T18:35:33Z")

</div>

Include it again very close to Homey

---

<div class="post-metadata">

**Author:** ![Zev](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/zev/32/33261_2.png) [@Zev](https://community.homey.app/u/Zev)\
**Post date:** [January 2, 2021, 10:02pm UTC](https://community.homey.app/t/no-power-consumption-update-in-qubino-app/40266/3 "2021-01-02T22:02:01Z")

</div>

Hi JP,

Changed the distance from 3 meters to 30 cm. That did the trick!

Thanks,  
Zev