# Need some feedback for a flow **URL:** \ **Category:** Flows\ **Created:** [May 8, 2019, 4:28pm UTC](https://community.homey.app/t/need-some-feedback-for-a-flow/12845 "2019-05-08T16:28:25Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Tiwas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tiwas/32/10066_2.png) [@Tiwas](https://community.homey.app/u/Tiwas)\ **Post date:** [May 8, 2019, 4:28pm UTC](https://community.homey.app/t/need-some-feedback-for-a-flow/12845/1 "2019-05-08T16:28:25Z")
Hi. Mostly very happy about my Homey, but I was wondering about how to attack a challenge. I have a flow that controls some devices, where around 10 are dimmable light sources. I also have a light meter, and I want the relative light to change with the outside light levels. This also means that lights that are turned off should not turn on. Is there an [easy] solution to something like this? I remember seeing this as one of the use cases on the Homey web site and was kind of expecting to see some built-in support for it. I would prefer not to make a flow for each light source. Thanks! ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [May 8, 2019, 7:30pm UTC](https://community.homey.app/t/need-some-feedback-for-a-flow/12845/2 "2019-05-08T19:30:42Z")
Since you don’t specify which bulbs you use, how they are controlled and how your flow looks like, it is a bit difficult to give useful feedback… ---
**Author:** ![Tiwas](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/tiwas/32/10066_2.png) [@Tiwas](https://community.homey.app/u/Tiwas)\ **Post date:** [May 8, 2019, 8:02pm UTC](https://community.homey.app/t/need-some-feedback-for-a-flow/12845/3 "2019-05-08T20:02:31Z")
I understand. I have some Ikea dimmable Trådfri bulbs, some Fibaro FGD-212 dimmers and also some Qubino dimmers. The light is meassured with a Philio PST02-B1 3-in-1 device. The flow is triggered by change in the lux value. As for the logic there’s a few things I need to sort out. As I said I want the dimming value to be relative, so I need to figure out a way to handle when a device turns down to zero so that it’ll dim up again. If I’m not mistaken, the issue would be to handle all dimmable lights as an array, checking if it’s on or off, if it’s on, then dim according to the change in lux value from the sensor. It might require me to get into scripting or something? ---
**Author:** ![PetervdK](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/petervdk/32/20669_2.png) [@PetervdK](https://community.homey.app/u/PetervdK)\ **Post date:** [May 8, 2019, 8:12pm UTC](https://community.homey.app/t/need-some-feedback-for-a-flow/12845/4 "2019-05-08T20:12:08Z")
Hmm, maybe below links could be a bit of a start? (the last one is in dutch, don’t know if that is a problem) > [@How to ajust the dim level on 3 IKEA trådfri E14 candle bulbs at the same time in a flow](https://community.homey.app/t/how-to-ajust-the-dim-level-on-3-ikea-tradfri-e14-candle-bulbs-at-the-same-time-in-a-flow/10821): > > When Choose the first of the three bulbs (put a number on them, so u can tell the difference) Then choose “Dim-level changed” with the tag “level”. Then Choose the second bulb, and thereafter choose Dim to - choose the tag “level” Choose the third bulg, and thereafter choose Dim to - choose the tag “level” It works like this: When u slide the dimmer on your first bulb, the other two bulbs will follow to the same level as the first bulb. Works like a charm, but it took about an hour to fi… > [@How to simplify semi-complex lighting scenarios?](https://community.homey.app/t/how-to-simplify-semi-complex-lighting-scenarios/11649): > > I love homey, but in the more complex scenarios with lighting as one example, the flows needed are just nuts. I currently have 8 flows for my bedroom alone, to trigger things based on sensors, time and buttons. Is there any apps that can simplify things? This is the goal I want to achieve, and I hope there is a simpler way to do it. Gear: 1 x Hue being ceiling lamp 2 x light strips (under each side of a bed) 2 x motion sensors (detecting motion from each side of the bed) 1 x motion sensor … > [@Hue motion sensor met geavanceerde wensen](https://community.homey.app/t/hue-motion-sensor-met-geavanceerde-wensen/9140): > > Beste allen, Ik heb inmiddels erg veel apparatuur in huis aan de Homey hangen en volledig naar wens ingericht met Flows. Ik loop alleen vast bij het configureren van de Homey met hue motion sensor. Ik ben bang dat ik hele specifieke wensen heb. Ik heb op dit moment 3 hue bridges draaien met iConnectHue om alles werkend te hebben en wil graag alle ‘triggers’ verplaatsen naar de Homey. Dit zijn mijn wensen: -Indien buiten de zon op is; en beweging in de woonkamer; en de lichtintensiteit onder …