# Need help with Temperature flows **URL:** \ **Category:** Questions & Help\ **Created:** [November 10, 2024, 1:07am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156 "2024-11-10T01:07:03Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![kithemmasiri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kithemmasiri/32/79563_2.png) [@kithemmasiri](https://community.homey.app/u/kithemmasiri)\ **Post date:** [November 10, 2024, 1:07am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/1 "2024-11-10T01:07:03Z")
Hello my name is Kit, I have many advance flow that work 100% of the time but I don’t know how to do a simple temperature for turn of and on my AC. I have 2 temperature sensor in the room just to double check if the sensor is not working could some one help me make this flow work. when Temperature becomes greater than 78F turn on AC when Temperature becomes Less than 75F turn off AC the current flow that I have temp greater than 80F the AC still not come on and when temp less than 70F the AC still not turn off ![Screenshot 2024-11-09 165742](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/7/67428bf06ee645688a843e287ac231abf2a91b51.jpeg) Thank you very much ---
**Author:** ![ricercar](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ricercar/32/101928_2.png) [@ricercar](https://community.homey.app/u/ricercar)\ **Post date:** [November 10, 2024, 10:17am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/2 "2024-11-10T10:17:10Z")
Hello, without really trying to understand your flow I however see two potential problems: 1. a card in a flow runs ONCE. You have cards with 2 lines who stem from the same origin 2. ALL is NOT an AND command ! ALL succeeds if ALL its inputs are true at the SAME moment which never happens in this case ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [November 10, 2024, 11:21am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/3 "2024-11-10T11:21:51Z")
Hi Kit, As @ricercar mentioned already, I guess you have to explain a bit more about the flow, because this… > [@kithemmasiri](#): > > when Temperature becomes greater than 78F turn on AC …is not what I find in the flow. There are lot (unknown) commands in-between. However, I guess the main problem is the point 2, mentioned also by @ricercar. And for a better debugging, one suggestion would be to change the first combined flow into two separate flows. ---
**Author:** ![kithemmasiri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kithemmasiri/32/79563_2.png) [@kithemmasiri](https://community.homey.app/u/kithemmasiri)\ **Post date:** [November 10, 2024, 7:34pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/4 "2024-11-10T19:34:35Z")
@ricercar @DirkG Thank you so much for your respond, I make a new simple flow for easier to understand. my gold is to turn on ac when Temperature becomes greater than 72 turn off ac when Temperature becomes less than 70 but this simple flow does not trigger when tempe becomes greater than 72 and does not trigger when thempe becomess less than 70. ![Screenshot 2024-11-10 113000](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/e/4/e439a6a9ed2bde4f3cea0aa5bb668949e0ffc51d.jpeg) ---
**Author:** ![Mike1233](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/mike1233/32/20991_2.png) [@Mike1233](https://community.homey.app/u/Mike1233)\ **Post date:** [November 10, 2024, 8:00pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/5 "2024-11-10T20:00:52Z")
If you have seperate sensors you can try this. IF temperature changes AND temperature is greater then 72 (Logic card) THEN turn on the AC. ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 10, 2024, 10:50pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/6 "2024-11-10T22:50:47Z")
Connect a timeline card to the triggers, to find out if the trigger is the real issue. ---
**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\ **Post date:** [November 11, 2024, 10:06am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/7 "2024-11-11T10:06:34Z")
Are you sure? The flow card _ **Temperature becomes greater than 72 °F** _ triggers just, if the temperature exceeds from \< 72 °F to \> 72 °F. So if the temperature is already \> 72 °F after creating/saving the flow, it will not turn on the device. And the device will only switch off when the temperature drops below 72 °F. Have you ever tested the flows? Afaik, in the beginning when Fahrenheit was introduced there were some problems with the calculation or something else between Celsius and Fahrenheit. Therefore it’s important to use the actually Homey firmware and app version. You may also check whether the temperatures from the Sensibo sensor are correct shown in Homey. ---
**Author:** ![kithemmasiri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kithemmasiri/32/79563_2.png) [@kithemmasiri](https://community.homey.app/u/kithemmasiri)\ **Post date:** [November 11, 2024, 11:30pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/8 "2024-11-11T23:30:37Z")
Thank you so much for your reply. yes I did test the flow it work while I click test. I belive the problems is it did not trigger when the themp become greater than 72F. I did check on sensibo app and homey pro app to see if it both fahrenheit and celsius and I also keep an eye on the temperature on both app. I tested with a heater . room themps start at 72F then I turn the heater on so the room become 80f. in the sensibo themp said 80F in the homey app said 80f. still no trigger (doesn’t turn on) and same, the room start at 80F turn on Ac when the room themps become 69F in the sensibo themp said 69F in the homey app said 69f. still no trigger (doesn’t turn off) Thank you so much for your help ---
**Author:** ![kithemmasiri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kithemmasiri/32/79563_2.png) [@kithemmasiri](https://community.homey.app/u/kithemmasiri)\ **Post date:** [November 11, 2024, 11:33pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/9 "2024-11-11T23:33:10Z")
I don’t know how to do or what does it mean Connect a timeline card to the triggers, to find out if the trigger is the real issue. Thank you ---
**Author:** ![kithemmasiri](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/kithemmasiri/32/79563_2.png) [@kithemmasiri](https://community.homey.app/u/kithemmasiri)\ **Post date:** [November 11, 2024, 11:35pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/10 "2024-11-11T23:35:55Z")
Thank you so much for your reply. and yes the logic card did the trick. but do you have another solution for cleaner flow? right now just need 2 more cards just to do a simple themp trigger. ![Screenshot 2024-11-11 153124](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/6/4/643e46927aa6fc6baf3d0c1b5b80eee0cc8366c3.jpeg) Thank you ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 11, 2024, 11:42pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/11 "2024-11-11T23:42:35Z")
Something like this. ![1000037573](https://us1.discourse-cdn.com/flex025/uploads/athom/original/3X/c/2/c26cc6e47ec57c0e8506211f6bd5bf24b1ad6153.jpeg) ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [November 12, 2024, 5:21pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/13 "2024-11-12T17:21:07Z")
Split this topic on November 12, 2024, 5:21pm UTC 2 posts were merged into an existing topic: [[APP][Pro] Sensibo - Air Conditioning and Quality](https://community.homey.app/t/app-pro-sensibo-air-conditioning-and-quality/90295/275) ---
**Author:** ![Peter\_Kawa](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/peter_kawa/32/173848_2.png) [@Peter\_Kawa](https://community.homey.app/u/Peter_Kawa)\ **Post date:** [November 12, 2024, 12:27am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/14 "2024-11-12T00:27:17Z")
Ah, you’d best contact the app developer by posting the issue in the Sensibo app topic: > [@\[APP\]\[Pro\] Sensibo - Air Conditioning and Quality](https://community.homey.app/t/app-pro-sensibo-air-conditioning-and-quality/90295/5): > > Reserved for future ---
**Author:** ![Rmb](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/rmb/32/79135_2.png) [@Rmb](https://community.homey.app/u/Rmb)\ **Post date:** [November 12, 2024, 10:41am UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/16 "2024-11-12T10:41:30Z")
To be sure what is happening, just make two test flows that write something meaningful to the time line including temperature. One triggering on “temp change” the other one on “when temp greater than”. ---
**Author:** ![OH2TH](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/oh2th/32/111414_2.png) [@OH2TH](https://community.homey.app/u/OH2TH)\ **Post date:** [November 12, 2024, 6:03pm UTC](https://community.homey.app/t/need-help-with-temperature-flows/120156/17 "2024-11-12T18:03:53Z")
Moved Sensibo specifics to the app topic.