# My Wired Fibaro Smoke Sensor FGSS-001 keeps beeping

**URL:** <https://community.homey.app/t/my-wired-fibaro-smoke-sensor-fgss-001-keeps-beeping/30522>\
**Category:** Questions & Help\
**Created:** [May 28, 2020, 5:22am UTC](https://community.homey.app/t/my-wired-fibaro-smoke-sensor-fgss-001-keeps-beeping/30522 "2020-05-28T05:22:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cuprani](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/cuprani/32/3575_2.png) [@Cuprani](https://community.homey.app/u/Cuprani)\
**Post date:** [May 28, 2020, 5:22am UTC](https://community.homey.app/t/my-wired-fibaro-smoke-sensor-fgss-001-keeps-beeping/30522/1 "2020-05-28T05:22:33Z")

</div>

Homey: (Early 2016)  
Firmware: 4.2.0  
Fibaro app version: v2.4.2  
Fibaro device: FGSS-001  
Firmware device: 2.5.2

My Fibaro smoke sensor keeps beeping.  
It’s powered over a 24V continuous source. After connecting the power source I removed and re-included the smoke sensor.

It still beeps about every 30 minutes to an hour. Sometimes it only beeps ones but sometimes 4 times in a row. I turned off sabotage alarm, but there are no options to turn off the “signal-lost” beeps. But I really don’t know what triggers the beeps. Maybe it isn’t a connection issue. When it beeps, I see nothing change in Homey.

I have several Zwave and Zwave plus devices in my home. I have 2 smoke sensors V1 (installed) and they both have the same problem. One of them is in about 2 meters of the homey in a direct line.

Anybody knows where to look for the solution?

---

<div class="post-metadata">

**Author:** ![Ole\_Rosset](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/ole_rosset/32/52663_2.png) [@Ole\_Rosset](https://community.homey.app/u/Ole_Rosset)\
**Post date:** [April 25, 2022, 8:46am UTC](https://community.homey.app/t/my-wired-fibaro-smoke-sensor-fgss-001-keeps-beeping/30522/2 "2022-04-25T08:46:42Z")

</div>

I have the same problem (and the sensors are battery powered) and have no solution. Could it be that the Fibaro app for Homey has poor support for the older smoke sensors? When I was using the Fibaro Home Center 2, I had no problems with these smoke sensors.

---

<div class="post-metadata">

**Author:** ![DirkG](https://sea1.discourse-cdn.com/flex025/user_avatar/community.homey.app/dirkg/32/118897_2.png) [@DirkG](https://community.homey.app/u/DirkG)\
**Post date:** [April 25, 2022, 9:02am UTC](https://community.homey.app/t/my-wired-fibaro-smoke-sensor-fgss-001-keeps-beeping/30522/3 "2022-04-25T09:02:56Z")

</div>

There are already lot of topics regarding this problem, also with solutions.  
Maybe this should help:

> [@Fibaro Smoke Detector - Alarm stays on](https://community.homey.app/t/fibaro-smoke-detector-alarm-stays-on/56774):
>
> I recently ran tested one of my Fibaro Smoke Detectors to test a new flow attached to it. All worked fine. However now in Homey the detector remains in an alarm state. Dash shows the fire icon in red. Is there a way to reset the smoke detector/alarm mode?